Header banner
Revain logoHome Page
🛠️ yakamoz mortising template bearing woodworking: mastering precision and efficiency logo

🛠️ Yakamoz Mortising Template Bearing Woodworking: Mastering Precision and Efficiency Review

6

·

Very good

Revainrating 4 out of 5  
Rating 
4.0
🪚 Router Bits, 🔪 Cutting Tools

View on AmazonView on ЯM

Media

(4)
img 1 attached to 🛠️ Yakamoz Mortising Template Bearing Woodworking: Mastering Precision and Efficiency
img 2 attached to 🛠️ Yakamoz Mortising Template Bearing Woodworking: Mastering Precision and Efficiency
img 3 attached to 🛠️ Yakamoz Mortising Template Bearing Woodworking: Mastering Precision and Efficiency
img 4 attached to 🛠️ Yakamoz Mortising Template Bearing Woodworking: Mastering Precision and Efficiency

Description of 🛠️ Yakamoz Mortising Template Bearing Woodworking: Mastering Precision and Efficiency

Shank Diameter: 1/4", Cutting Diameter: 3/4"; Cutting Length: 7/16", Total Length: 2". C3 Micro-grain Tungsten Carbide Cutters, Solid Hardened Steel Bodies with Anti-Kickback Design. Two flute carbide cutters with 1/4" shank. Perfect for Routing door hinge mortises using a hinge template. Hinge Mortising Router Bit will rout clean cutouts for hinges or other shallow cutout projects. Ideal for plywood, wooden door frames, wooden window frames, cabinets and boxes,solid wood, MDF, particle board, etc.

Reviews

Global ratings 6
  • 5
    4
  • 4
    0
  • 3
    0
  • 2
    2
  • 1
    0

Type of review

Revainrating 2 out of 5

Does what it's supposed to do

Worked well. 4" hinge and lock embedded 20 door panels. Pine wood. There were no issues with the guide support, the edges of the binding were clean. Sized to fit DeWalt cordless router, shallow depth of cut at around 75% RPM. See how the Tailor hold up over time but seem like a good value

Pros
  • Stylish and modern design
Cons
  • Low maintenance

Revainrating 5 out of 5

Do not use with Ryobi Door Hinge Tool

I bought this to replace the bit that came with the Ryobi Door Hinge Tool. The club is very sharp and quickly cuts through the door panels. When I assembled the first hinge I noticed that the cut out area was too large. I immediately looked at the conductor and there was a small gap brought out from the sides. It doesn't look like it, but the bearing should be slightly smaller than the cutter.

Pros
  • Price
Cons
  • None

Revainrating 5 out of 5

Works great with power tool parts and accessories

I needed to replace a rotting frame on my front door and chose the Menards PVC frame kit. I had to cut the hinges and latches on the frame. I made my own attachment out of 1/2 plywood (trace and cut out the loop). First I made a test cut on the remaining piece of PVC. The chisel worked great - the cut was smooth, clean and followed the jig perfectly. It was the back door in my shed and it was my first time doing it so my expectations weren't high but it turned out great. Definitely worth the…

Pros
  • Excellent construction
Cons
  • Crumpled packaging

Revainrating 2 out of 5

Jagged results for Dado

I was trying to cut a Dado out of 23/32 inch thick plywood and the picture shows the result. slot of this bit. It's so bad I couldn't use it. At right is a clean cut from a Bosch bit (https://smile.amazon.com/gp/product/B084DXN73X). I finished my project with a Bosch bit and it's great. The yellow ceramic coating disappeared on first use. It's hardly worth sending back, but definitely don't use it.

Pros
  • C3 cutter made from fine grit tungsten carbide, solid hardened steel body with anti-kickback protection
Cons
  • Large and bulky

Revainrating 5 out of 5

Ideal for power tool parts and accessories

Needed to replace a rotten frame on an exterior door, decided to use a PVC frame kit from Menards (if it came out).I first made a test cut on the remaining piece of PVC.The drill bit worked great - the cut was smooth,clean and followed the bracket perfectly.This was for the tailgate in my shed and it was my first time it didn't meet my expectations.high but turned out great.Definitely worth the money.

Pros
  • Two 1/4" shank carbide bits. Ideal for routing grooves for door hinges using a hinge template.
Cons
  • Can't remember

Revainrating 5 out of 5

Works great but not sure how long it will last.

I used this to cut three large grooves in a slab of cherry wood with a living edge for a mantel. I had no problems with the bit. It is AMAZING value for money. However, towards the end I noticed that a significant amount of the powder coating had chipped off, so I'm not sure how long it will last after multiple uses. Luckily I don't chisel. So if you only groove occasionally I would recommend this attachment, especially if you are just starting out with woodworking. Also, make sure you check…

Pros
  • shank diameter: 1/4 inch, cutting diameter: 3/4 inch; Cut Length: 7/16" Overall Length: 2"
Cons
  • Folding Pack