Zalman R2 ATX Mid Tower Gaming PC Computer Case: Mesh Front Panel, Tempered Glass, Cooling System - Black Review

With 2 cases of Zalman Z1 neo, you can compare the quality of the metal with this model. Walls, stiffeners are much thicker for R2 than for Z1. For example, I tried to put pressure on the inner walls of Z1 and without much effort the metal begins to deform, it doesn’t work with R2, you need to start pressing with almost all the weight :)) The rear wall has enough volume to stretch the necessary wires along it, (about 23 - 24 mm along the tape measure) the wall closes without any effort +…

Pros: Nice, compact case that fits my eATX. Surprisingly, it consists almost entirely of aluminum, only the front panel is plastic, and the window is tempered glass. Its cons: There is not enough space for the power wiring under the cover, everything is right back to back.

Different pros: The quality is 9 out of 10. For such a price, more than acceptable. Some cons: On the motherboard mounting site, one screw did not match the gap on the board itself.

Fits very well in my white build Has some pros Beauty, strength, reliability, equipment, plugs, cooler control via a button, and the cooler itself is of high quality, very quiet Cons below: Cooling, only two slots on the sides and a small hole at the bottom, and only one cooler on the back

In general, the body is good Different pros: The case is made of high quality Large set of fasteners Plenty of room for cables Hard enough Fan included Has dust filters Strained glass Different cons: It is not possible to synchronize the illumination of the complete fan + buzzes a lot, because speed cannot be adjusted Weak tinted glass

! When assembling the PC, I revealed one nuance, the old power supply does not have enough length for the mat. fees. I ordered extension cords on Ali! Keep in mind!

The impressions are rather negative than positive, on the one hand, I understand that this is a , on the other hand, it’s all a case, and as a case, it only stinks for very cold systems, no matter how many turntables you stick there, it will still be poorly cooled if you put the turntables on top they rest against the tower, the chassis is not stable, painted like the right wing of a Zhiguli in the garage, tempered glass is a plus, but how thin.

In general, a good case for its 3000 Pros: White, beautiful, the metal is strong, does not peel off, the transparent panel is tempered glass. Convenient location of the panel, if placed at the feet. The fan is quiet enough with iridescent lighting, which is controlled by a button on the panel. Molex fan power. CPU cooler be quiet! Dark Rock 4 (not Pro) got up close. The price is acceptable. Cons: Not premium. Access to HDD drives is limited, in order to unscrew the HDD clamps, you need to…

This is a really great budget case! The construction seemed pretty solid and there was plenty of room for cable management. It doesn't have the best airflow, but it seemed decent for the price. I will use this case again in future builds.

So I ordered the black version of this case and still got the white case, but it's actually a decent case with good airflow and room for an RGB fan with Molex Connection that for some reason my PSU didn't have. But the 7 out of 10 quality for the price is great for budget builds.

Nice case with RGB fan and controller included, the controller has an empty connector to control a second fan and also when extra cooling is needed. The case design is cable-friendly and makes even older budget builds look clean and modern. The magnetic dust filter is a really nice touch. I ordered two of these and both came well packaged with the side panel intact, which is a big plus for a budget case. It's obviously not a high-end case, but it's not flimsy like some of the other cases I've…

Even with 5 fans, the airflow wasn't very good. I had to remove the glass to keep the GPU from getting hot. The GPU ran up to 80 degrees with the glass on and dropped to 68 degrees with the glass off. Looks great, but I would spend a little more for a better case in the future.

So I ordered the black version of this case and still got the white case, but it's actually a decent case with good airflow and a place for the RGB fan uses a Molex connector which for some reason my PSU didn't have. But the 7 out of 10 quality for the price is great for budget builds.

Actually had to buy this look at the last minute due to poor planning, but it turned out to be a great buy, great features, well organized, easy to use, great price!

Suitcase looks great! Has good materials for its price. This is the third Zalman case I've bought. They're great on the budget. Here are some pros and cons of this particular case: PROS: - High quality materials. The case is heavier than you would expect given the price. - High quality paintwork. There are no partial black/grey areas like I've seen in some other colored cases. Smaller cable slots provide a tidier look inside the case while still leaving plenty of room for cable management. Nice