πͺ Cutting Tools
4 Review
Includes 7 commonly used hammer drill bits. Ideal for use with concrete, stone, and masonry. Part of Bosch's Blue Granite series. High-temperature brazing prevents carbide-cutting edge from breaking out. Softened shanks have ANSI-compliant aggressive gripping power.
4 Review
SET OF 13 COBALT DRILL BITS - In the following imperial sizes 1/4", 15/64", 7/32", 13/64", 3/16", 11/64", 5/32", 9/64", 1/8", 7/64", 3/32", 5/64", 1/16". M35, Fully Ground, 135Β° Split Point - Our Drill Bits Contain 5% Cobalt, Are Fully Grounded for a Precision Drilling Diameter. 135Β° Split Point Design Makes it Easier to Drill Repeated Holes in Harderβ¦
Read more about this product
4 Review
Material: Solid Tungsten carbide. Dimension: 1/8" Shank (3.175mm). Cutting edge diameter, 1/8" (3.175mm). Cutting edge length/flute length, 17mm. Overall length, 45mm. 5pcs Downcut Double Flute Spiral CNC Bit: Ideal For carving/cutting/engraving/milling/slotting/sculpturing in materials like MDF, ABS, PVC, acrylic, nylon, resin, plastics, density boardβ¦
Read more about this product
4 Review
Used in a milling machine to find the workpiece edge. All working surfaces are hardened and ground.
4 Review
RD2100. Down Cut Spiral. Industrial Quality.
4 Review
Whiteside Router Bits are made with Premium Carbide. Precision ground for proper balance at high RPM. Industrial Quality.
4 Review
Whiteside Router Bits CNC Spoilboard Cutter: Spoilboard cutters are designed specifically to resurface, or plane, the top surface of the spoilboard. Shank: 1/4" for smaller CNC machines. Cut Diameter: 1". Cut Length: 1/4". Made in the USA.
4 Review
3-WING INSERT CNC ROUTER BIT: Shank: 1/2"; Cut Diameter: 2" ; Carbide Inserts: 12*12mm. 3-wing design, resulting in a more balanced tool while running. INDUSTRIAL GRADE CNC WOOD ROUTER BIT: Super-strength steel body with anti kickback design, 3 cutting blades. COST-EFFECTIVE INSERT BIT: The surfacing router bit utilizes 4-sided solid carbide insertsβ¦
Read more about this product
4 Review
Whiteside Router Bits are made with Premium Carbide. Precision ground for proper balance at high RPM. Industrial Quality.
4 Review
Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. Kickback reducing design. Individually computer balanced. Precision ground for the smoothest cuts. Covered by Freud's limited lifetime warranty.
4 Review
Steel pin and; durable plastic cone allow for precise centering when changing or adjusting sub bases. Simply place pin in router collet, place cone on pin and; tighten screws on sub base. Easy to use. Quick to setup.
4 Review
Solid Carbide Up cut spiral router bit with 1/2inch shank and 1/2inch cutting diameter, 2 inch cutting length, 4 inch for total length. The CNC End Mill For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp. Spiral bits used for smoothly upcut groove and slots, Mortises, Cycles and dados with clean edge and bottom, better thanβ¦
Read more about this product
4 Review
Top Quality: Made from HRC55 Carbide with AlTiN Coated that is very tough, resists wear and offers high cutting performan;. AlTiN Coating: Titanium aluminum nitride (AlTiN) coating lubricates the end mill for stability at high temperature and superior wear resistance at high cutting speeds, offering better heat resistance than TiAlN, TiN or TiCN coatingsβ¦
Read more about this product
4 Review
Precision Size: Precise 4 Wings can cut your project material quickly and cleanly.1/2 Inch Shank CNC Spoilboard Surfacing Router Bit, 1/2" Cutting height, 1/2" Cutting depth,2"(50.8mm) Cutting Diameter. High-Quality CNC Router Bit: The sharp carbide tipped bit, made of microcrystalline carbide blades and strong hardened steel, have excellent wearβ¦
Read more about this product
4 Review
Overall Dia. (D) 2", Bearing Dia. 1/2", Carbide Height (h) 1", 3/4" Radius, 1/2" Shank. Cuts all composition materials, plywoods, hardwoods, and softwoods. Use on hand-held and table-mounted portable routers.
4 Review
Product Name : Collet Nuts;Model : ER11. Hole Diameter : 9mm/ 0.35";Thread Diameter : M14. Overall Size(Approx.) : 19 x 14mm/ 0.7" x 0.55" (D*L);Material : Metal. Color : Black;Net Weight : 12g. Package : 1 x Collet Nuts.
4 Review
standard : Cutting edge diameter: 1.5mm / 0.059"; Shank diameter: 3.175mm / 1/8"; Cutting edge length:8mm / 5/16" ;Color: silver. material : Use of ultra-fine grain carbide material with good milling and cutting performance, ensure high work efficiency. features : High hardness, high wear resistance, high strength. Have sufficient bending strength andβ¦
Read more about this product
4 Review
Fit 12" Craftsman Band Saw Made of prime quality carbon steel. Wood, Butcher and general purpose cutting. Unique welding technique :strong and smoother welding point. Raker set teeth arrangement, all teeth arranged evenly for better cutting performance. Hardened Teeth for hard wood, frozen meat and bones.