Review on 🐇 Frosted Removable Glass Covering: rabbitgoo Window Privacy Film for Bathrooms - Non-Adhesive, Matte White (17.5 x 78.7 inches) by Diana Martin

The thing is great. It is opaque and offers 100% privacy protection day and night. You won't see any shape on the other side unless it was within 1 inch of the glass. It also diffuses light well and can brighten a room. Here are some instructions and installation tips, having already created 8 windows. To be absolutely clear, if a product didn't work for the people who got 1 star, I'm adamant that the problem was either with them or with their glass. I have bought 5 different qualities of these Rabbutgoo slides and they have all worked well but it takes patience and the right steps. If you rush or cut corners, you will get into trouble. CLEAN YOUR WINDOW - Get Windex and do it at least twice. You need to make sure there is no dirt, dust or oil. Even if you can't see it, it could still be there.2. Measure and cut as close as you can without going too small.3. Take a spray bottle filled with water with a drop or two of liquid soap in it and shake it. If your area has hard water, maybe try filtered or bottled water to be on the safe side.3. Apply soap spray only immediately before applying the film. If at some point it dries out, you'll need to add more. The film requires a small amount of moisture on contact.4. Only remove the protective film immediately before laying it on a wet pane. It's not always easy to remove. Try to gently poke the edge with a knife or sharp needle to loosen the plastic. Pull down the backing maximum 10 inches and install directly on the window. Then reach back and pull back more from the back, gradually applying pressure to the wet window. IMPORTANT: It must be applied quickly, touching the side of the window as little as possible. He partially uses static electricity to cling to the window. If you touch it for too long or bend it, you will lose the static charge.6. Once it's on the window, use a squeegee or ideally a felt-lined plastic card to smooth out any bubbles. The Felt Map can be found at Revain.7. Keep an eye on it for the next hour or two to see if new bubbles form and repeat step 6. It's still very likely that mistakes will be made when applying the foil, but it's silly that people blame the product. I've done 8 windows now and of those I had 3 cut pieces that had to be thrown away and it was all my fault.