Review on 🛷 Enhance Your ATV Snow Plow with WARN 67870 Powersports Deflector in Black by David Flores

It was a tedious job. Helping the next guy who has a Kodiak or a Bruin I think 1999-2004 might not be right. But here are the details. You will need to add a plow to your bike: Superwinch mounting kit 2202855 - you will need a roller guide. This kit does not come with one. There is one that comes with the winch but you will need to cut holes as the holes do not match the Superwinch mounting kit. This is the worst part of the setup. Take a hammer and bring lots of patients. It is difficult to align the mounting holes with the ATV's frame and pushrods. The bracket fits very snugly to the frame bracket, then the bumper is attached to the frame bracket using the screws from the hardware kit. Bicycle. The blade feet of the new model are too wide and not suitable for mounting on the bike. Warning Yamaha ATV Blade Mount Kit 64670 – Bike Specific. Mine installed in about twenty minutes. WARN 68200 ATV Cyclone Angled Plow Blade - I made a 60" plow blade so I could make the biggest cut and steer it off the bike. Warn 67870 ATV Plow Control Flap - I added this to keep as much snow off me as possible. The landfill is not designed for that. But the fasteners are included and I was able to drill through the mouldboard and install the rubber in ten minutes. out of them. There is a pair that came with a blade. They drag across the road and I believe they wear out quickly under the weight of the blade resting on them and then dragging across the tarmac. I went with a 2000 lb winch. I will not comment. A winch is pretty much a winch if you're just using it to raise and lower the shield a few inches. The winch itself is very easy to install. Lines outside the premises. Hope that helps. Good luck, you will need this when installing the winch mount.