Review on 🌱 DIGITEN Connect 03 10L Environmental Sensor by Jeremy Bradford

FL-S402B flow meter is amazing! Snaps straight into plastic tubing with 1 /4" inner diameter for easy installation. I just hooked it up to my Raspberry Pi and reverse osmosis system. This gauge seems to be a lot more sensitive than the FS200A G1/2 gauge I've been using, but I'll have to do some more testing to see how accurate it is. According to the data I found on the internet, it should put out 1380 pulses per liter. I'll try to update this review when I know more about the accuracy. The plastic clasps are very difficult to remove I think due to the very strong plastic. When I tried to remove it by the tab, I just broke the tab. I suggest squeezing the two ends of the clip firmly with needle nose pliers to pop them out (they will fly) I have a pair of mounting clips that are much thinner than some other quick disconnects and are slightly easier to remove from this gauge . Also, the quick connector requires very clean plastic tubing to prevent dripping at high pressure. This is typical of various Fast Connect products (even some high-end products like this gauge), although some are more forgiving than others. Simply use a razor blade and make a fresh, vertical, clean cut on the 1/4" ID tubing to prevent the connection from leaking.