Review on 🖨️ Enhance Your 3D Printing Experience with YSF PLA 3D Printer Filament by Nick Garrett

(8/29/2021} Rating down to 1 due to second reel received (batch I as well as black) was duller black and failed at 200th layer. Made from a simple large box piece with vents. The lower layers had little or no strength.). Completely different results. Do not buy directly from the company as they have no contact information for customer support. We are arguing whether we should buy another roll. (08/22/2021) This is my PLA selection. , nozzle temperature of 208 makes a very hard and shiny part, almost bulletproof! Good formula and excellent modeling performance. Use a nozzle temperature of at least 200°C. This seems to eliminate some of the clogging issues I had with the stock 0.4mm nozzle and helps with finishing and layer bonding. I am deducting one star for an adhesion issue I had which could be due to a 50°C layer temperature on the glass bed. I increase the bed temperature to 60°C on the next part for testing. I solved the problem with the current model with a heavy-duty glue stick. In addition, movement speed has been reduced to 80. Fine, just choose. Nice glossy finish and no stretching as I modified my extruder to work with the MDD mod.