Review on 🚿 GE Silicone Water-Ready Cartridge - M90007 by Athenasby Whitney

Excellent for sealing a tub and will look good once the area has been properly treated which means the area needs a proper cleaning, especially wall tiles. surrounding the bathtub should be sealed with duct tape, much like painting a wall. The tape prevents sagging and leaves a clean, straight line around the entire perimeter where sealant is applied. I have read other reviews that said this material is difficult to apply but be aware that it is not regular putty or just regular sealant, it is also an adhesive. Because it's an adhesive, it tends to stick to anything, whether it's your hands, rags, walls, or even the bathtub if you're not careful. So my advice is; Remove the old sealant, clean the area well (I used regular alcohol), tape the area above the tub as close as possible to the area you want to seal. I used a credit card to force the sealant into the crack, but you can find tools for this purpose here at Revain, scrape excess sealant off the tub (again, I used a credit card), remove as much residue as possible possible with a rag and alcohol (make sure you turn the rag inside out). often to prevent the sealant from spreading and eventually making a mess), and then remove the tape. If you are happy with your result, let it dry.