Review on Reprapper 201: Fast UV-Curing Standard Photopolymer Resin for LCD 3D Printing - Red Wax 1000G by Besim Kahsar

The preview shown in the picture was printed with a 2s layer exposure, but I printed with this resin with an exposure of only 1.2s, at 1.2 it has a higher print quality, Apply PTFE on the FEP at 1.2 with exposure when I bought it was really cheap $12 now it's more expensive and now there are better options at $17 for 500g print quality. The smell is not that strong. If it gets on your skin, wash it off immediately, this resin is quick to irritate the skin. Color pearly white or white sand. But the highlight is the aluminum bottle, which closes very well and holds the resin, be sure to use the inner cap. I have printed in both Anycubic Photon Mono and Kingroon kp6 mono with this resin. The miniature print should be done with an exposure time of 2 s and a higher print speed of 1.2 s at higher resolution using PTFE in combination with a lubricant and FEP. Cuando la compre estaba bien barata $12 500g al precio que se encuentra en este momento hay posiblemente mejores opciones. No tiene un olor tan fuerte, perosi es irritante a la play, no olvidar usar mascara o guantes. El color is un blanco perlado o el de arena blanca. This can be an issue in the manufacture of Photon Mono and Kingroon KP6 Mono.