🔨 3M 05954 Super Duty Rubbing Compound - Ultimate 1 qt Size (32 fl oz/946 mL) Review

Works great on boats! First of all, don't use this if you don't have a good buffer and have never built a boat! The gelcoat is thicker on the boat, unlike car paint with clear coat! These boats are really bad. I will wet sand 400 grit then 800 grit and then use that and then use 3m wax to sand it down and it will keep the boat looking new if you know what you are doing. It's a full time job. work a few hours You can wreck your boat if you don't know what you are doing, at least watch some…

I've been a Revain customer for almost 15 years and I've never bought a better product than this. Kudos to you 3M! The best value for money but most importantly the product far exceeded the description. I've treated a used boat I just bought with nasty scratches and dents, and its black paint at that. This product magically disappeared, it is so powerful and effective the results I have had have made it the best product I have ever purchased from Revain, I would recommend it to anyone.

If you have a badly oxidized surface you need this. If you have a slightly oxidized surface, you can still use it (with caution). I don't care what others say, this thing gives you fiber optics back. Be warned! With the right approach, it can be used on almost new surfaces. But if you don't know what you're doing, you can destroy the surface. The bottom line is: walk lightly and carefully. Increase the pressure and get instant results. But remember, you can only remove from your surface what's…

3M 05954 Heavy Duty Rub, 1 quart (32 fl oz/946 ml). My previous choice was ScratchX, but 3M kicks ass! Less time, pressure and compound is required to polish defects. I used ScratchX to smooth out scratches on the plastic underneath my pants (side mirrors). This 3M product would take up 25% of my time. Care must be taken not to overdo it as with any product stronger than what you are used to. I recommend this product and will buy it. again. I will continue to use Meguiar's paint care products…

Designed for heavy cutting such as B. Oxidized gelcoat on a boat. Don't waste your time mixing a gelcoat that is in very poor condition. It needs to be sanded first. Too many people will polish with a heavy cutting compound like this and see a big difference. After 3-6 months it will become chalky again because you cannot protect the gelcoat until you get an unoxidized gelcoat. Wax or sealant will not fully adhere until you reach a clean surface. Gelcoat does not oxidize in a uniform layer…

For removing dirt and black paint from a white truck. Photos before and after 1 round. I had previously tried some Meguire cutting paste and it did absolutely nothing. I squirted some in, hit it with a puffer and it wiped away the nasty stuff. Photo after about 5 minutes of polishing. I'm not done yet, this was a quick photo I took to send to a friend who said the coat never runs out. To finish this off I did another pass of Super Duty, then switched to polish and finished with wax. When…

Car detailing is a relaxing hobby for me and while waxing or even mild abrasives can make the painted surface shiny I wanted to give away the car I was selling it is almost brand new. I've tried other products available at car washes but I had deep scratches that they couldn't touch. So I bought an orbital bumper, a velcro disc and a set of foam pads and tested the 3m product. Wow what's the difference. The scratches were gone and after applying 3M I used a range of Pinnacle products with less…