🔧 High-quality Power Steering Pressure Hose for Honda Pilot V6 3.5L 2005-2008 - OEM Replacement 53713-S9V-A01 Review

Nice looking hose assembly. But this job is not for the faint of heart. It's quite difficult to route this behind the engine and transmission.

Worked but the metal part of the hose is not bent exactly like it should be in the car. Had to make some field adjustments for sure. It works now!

Purchased in June. Then I tried to do it myself, but I couldn't unscrew the screw. Eventually it was professionally installed in November and was told it was leaking. Make sure you test the product before the return period expires.

Visited the Honda dealer to have the power steering pressure hose replaced with this part and got new o-rings for the pressure sensor and it started leaking at the fitting, that goes hard on the side rails. As a result, I had to buy the original Honda pressure hose.

New hose installed and old pressure switch reconnected. It leaked. I ordered a new pressure sensor, which is also leaking. Upon closer inspection, I found that the diameter/depth of the o-ring groove is slightly larger. When I used a slightly larger o-ring the problem was solved.

The product was not new, it was remanufactured. The grooves for bolting the metal to the power steering sensor were missing or so worn that they could not be tightened to withstand the high pressure in the line. I had to return this used junk and just went to the auto parts store to buy a new one.