WiFi Antenna 8dBi Omni RP-SMA Male 2.4Ghz 5.8Ghz Dual Band + 📶 20cm Extension Cable - M.2 NGFF Card, Notebook, Drone - 2 Pcs Set Review

A little hint for anyone looking for an antenna that fits the NUC8 motherboard: they work. It took me a while to find the right antenna to connect to on the board's wireless chip after putting my NUC in an Akasa Turing fanless case and at first I thought they didn't fit, but they work. However, it took me a lot of time and patience to snap them onto the connectors. I had about thirty seconds to put them back together and return them. But finally. . . click! I connected both cables and both WiFi

It worked very well with my Intel m.2 card and Jetson Xavier AGX. I connected via a WiFi5 and 5GHz hotspot and got a much better speed than a mini USB WiFi dongle. There's something annoying about this configuration with dangling wires, I can find a solid attachment mechanism later. I designed and 3D printed a plastic desktop antenna mount that worked very well the first time, allowing the antennas to stand upright and I can point them as needed, just like a router. Anyway, reliable antennas…

Let me first say that the hardware worked as intended. No scratches/dents/flaws etc. I was looking to buy my own wireless card for the Dell Optiplex 3080 Micro which I received on Black Friday. I then used these two antennas since you need two, one for Wi-Fi and one for Wi-Fi/Aux (read: Bluetooth). One side of this connector is wide enough to rub against the other when properly installed. If you separate them firmly but carefully, you may end up with two antennas. It doesn't fully unscrew, but…

These extension cables are durable with good build quality. I needed these cables in a hurry and found what I needed at Tenmory for a good price. Connector (connected to NGFF card Intel® Wireless-AC 9260 supports Bluetooth® 5 and 2x2 802.11ac Wi-Fi Wave 2) connectors, connecting connectors was difficult because the connectors on the ends of the cables are very small and tight . when everything is perfectly aligned, the cable connectors snap into place and are firmly seated and connected. I…

It's only been 2 days since I installed these antennas on my HP Elitedesk 800 G2 for use with my Intel AC-7265 WiFi card, but so far so good . My device is about 25 feet from my router and I'm getting about 45 Mbps on standard Wi-Fi 2.4. However, when I use AC, Wi-Fi 5.0GHz I get almost 200Mbps. The internet was stable and I didn't have any dips. As for the Bluetooth aspect, I was only trying to connect it to Sony headphones and it suddenly disconnected twice, but I think it could be my…

I recently bought an m2 wifi card cable. Tenmori checked that everything was ok. I'm having trouble connecting the cable to the card. We thought there was something wrong with the cable, they sent a new cable! The second cable worked better. This company cares about their customers and has a good product. Word to those who buy a Wi-Fi card and cable separately. You have to work hard to put it on. But these cables definitely work and are of good quality. I definitely recommend them.