BD Diesel Performance 1300030 Isolator Review

I have a Dodge with over 350,000 miles. Sometimes the area gets dirty or there is an electrical issue I need to fix. I had a fairly new alternator in my engine and tried the foil wrap trick, which seems to have worked for about two years. I also had a new Timbo PPS that I installed a year ago. Still unlocked and locked. Threw that little bad boy in there, very easy install and my problems stopped perfectly in all my shifts

I bought my diesel cylinder new in 2002. The 47re transmission always struggled around 50 mph when seeking overdrive. it got worse with miles and years. I got around this by cleaning the top of the batteries with Windex to prevent shorting the batteries at the pins. I also cleaned the battery terminals and battery bases and the ground on the PCM. but I still had a few problems. Well I'm so glad I finally got this product. Now my shemale is moving like she always should. Oh, I also wrapped the…

Hi folks, I have a 2001 Cummins Ram 2500 5.9 with an automatic transmission. There were problems turning on and off the overdrive at a speed of 45-50 km / h. It was so annoying and bad for my trance. I tried replacing the throttle position sensor which cost $300. It didn't work so I sent it back. Then they told me in some workshop that it could be the shift magnet in the transmission. Now any other of these problems would be very nice. But I bought this and installed it in less than 20 minutes…

Pure skepticism! I bought my truck from my dad with just over 100,000 miles on it. The truck is amazing but for the last 5 years my transmission has been slipping at 45-55 mph. Read endless articles on TC lock etc, make a ground wire from the battery and wait for the transfer. Still nothing. You can understand my skepticism if the less than $40 wire SOLVED my problem! It was very easy to install and I tried to unlock TC but it didn't work. If you have a 47RE in a Dodge, just buy it and put it…

My 2001 Ram with a 5.9 liter diesel shifted gears unevenly most of the time and there was bumps at idle. Installed on the advice of a friend, the problem is gone. I found another brand had been installed on the truck (just bought) and was disabled. I tried to connect it first but the apps voltage still wasn't stable enough so I installed this one. They also ran a jumper wire from the PCM application wire to the application sensor next to the throttle. Not wanting a mess of wires under the hood,

This noise isolator definitely works, but I would recommend another way of connecting it to the appropriate wire from your PCM. I installed as instructed, drove the truck and was disappointed when the torque converter stopped working completely. I called BD Diesel for assistance. The guy I spoke to wasn't particularly friendly and dismissed the issue, but someone in the background overheard our discussion and said yes the faucet has been known to split the wire. I removed the faucet, removed…

Had shift problems on a 2001 Dodge 3500 with automatic transmission at about 40-45 km/h, slipped and wobbled when shifting, the part was delivered to me in a couple days. What a difference, the switches are like new! Simple instructions, followed the reviews advice, watched the video and decided to solder and hardwire the PCM cable rather than use the connector provided, avoid cutting the cable completely like others have stated. All warranties on this product are void, but as an experienced…

Worked great on our 1999 Dodge Ram 3500 4x4 diesel truck! We also have a 3/4 ton truck from the same year and have already done all the repairs like soundproofing and wrapping the generator wire with a tinfoil trick. This 1 ton truck we bought was used and we started to have a general noise (electrical noise) breaking the truck's circuit and making it jump around looking for the right gear. Very annoying and I'm sure the transvestite isn't very good. If you have problems with your transmission,

This muffler definitely does the job, but I would recommend another way of connecting it to the correct wire from your PCM. I installed as instructed, drove the truck and was disappointed when the torque converter stopped working completely. I called BD Diesel for assistance. The guy I spoke to wasn't particularly friendly and dismissed the issue, but someone in the background overheard our discussion and said yes the faucet has been known to split the wire. I removed the faucet, removed the…