💥 Enhanced Fuel Injector O-Ring Kit by Beck Arnley - Model 158-0900 Review

Now made in Japan. When you need to replace fuel injectors, gaskets need to be replaced to prevent fuel leaks. I'm exchanging my Villager 97, all injectors for new seals!

Now made in Japan If you need to replace the fuel injectors you will need to replace the gaskets to stop fuel leakage. I'm replacing all the injectors on my Villager 97 with new gaskets!

Fits my 2001 Nissan Xterra perfectly. The only caveat is that there was no black plastic piece between the 4 screws holding the fuel rail. This piece of plastic broke in half when I was unscrewing the screws. So I put in some stainless steel shims to take up the thickness. It worked PERFECTLY! It took a little longer than expected to get all 6. I had 4 different packages on different days. I received all 6 within 3 weeks :( .

Fits my 3.3L V6 engine in my 2003 Nissan Xterra 2WD. These were quality parts but take great care to properly line up the fuel rail over the lower intake. The injector cups will most likely not align perfectly (I didn't) so you'll need to average the alignment error over the guides and screw them in slowly using a cross torque pattern. Stupid design from Nissan. These are high quality o-rings, but they will still pinch and tear if your rail is misaligned. Guess how I know that.

Damaged o-rings rendered car inoperable. Advertised as 'buy by' (countdown hours and minutes), spend at least $XX ($35 in this case) and get delivery tomorrow 7am to 11am. All conditions were met at the time of ordering and confirmed upon subsequent receipt. These are auto parts that my car needs to function. 11:00 a.m. the next day - no delivery. In numerous chats and phone calls, it was promised that delivery would be made by 8:00 p.m. that night. There is no delivery at all. Customer Service