It also happens that the wire flies out of the machine. In plus and minus did not write. On the one hand, it's bad. Good on the other. If suddenly the wire is stretched and you do not calculate the distance, then you will not break the charge. This is good. In general, I am pleased with her. I do not recommend buying nozzles. It's easier to change the whole machine at once. As I do.

This is the first machine, so I am very pleased with it - it saves a lot of time and effort. What used to take 30 minutes, now only 10, and so short and evenly cut my hair as a non-professional has not yet succeeded. The husband is happy, what else is needed for happiness? I highly recommend it to everyone, especially since it pays off instantly (haircut at the hairdresser’s 250 r)

I bought this car for the first time 6 years ago. Then there was a different box, but everything else is the same. It still works but decided to change it. Bought the same. Just a good and reliable machine for home use. Bought for 1600. I recommend.

This product is very convenient to use The clipper is very good to use as it cuts hair neatly without pinching or tugging. You can easily choose the length of the nozzle. In addition, it is convenient that there is only one nozzle, since the machine, firstly, takes up less space with it, and, secondly, there is less chance of losing it. The minimum length is also very good, which allows you to use the machine for a rough neck shave.

I had the correction written down as a plus, but it doesn't hold up at all; you need to trim it very carefully so that it doesn't get lost in the shuffle. Without a nozzle, you can only cut material that is less than 3mm thick at a depth of 0.5. The skin is typically in poor condition. During the procedure, it seems like nothing at all; nevertheless, if you climb to wash thereafter, you will quickly feel microtraumas since it bakes quite aggressively. About "cuts from the first pass,"…

I did not like the nozzle (( I always use an old typewriter to measure exactly three millimeters when cutting my hair, and I acquired this tool specifically for that purpose. And around these parts at least 3 mm plus 1 millimeter (between the teeth and the nozzle is another 1 mm). That may seem like a trivial matter, but on my head it is immediately evident to anyone who trims their hair already with a hair length of 8-9 mm, so it will be obvious to everyone who does so. A nozzle size of 0.5…

Different pros: - cuts confidently and without any tension, does not pull hair. -no need to lubricate and sharpen -reliably serves us for many years With its cons. nozzle made of unsuitable plastic, it must be handled with care, and we carelessly, as a result, the extreme teeth broke off. Tried to buy a new nozzle, but did not fit.

The model of the clipper that is currently in use When I say three months, I mean it. In order to replace the machine, which had been working reliably for nearly ten years, I decided to purchase a Scarlett SC-166. The "craftsman" in the sharpening workshop thoroughly destroyed the blades, causing them to lose their edge and become dull. I believe that I am able to make an objective comparison, and the conclusion is that the new one is not superior! So. 1. How is the combination of quietness…

Perhaps someone will use the machine more often and he will have his own impressions. Before using the machine of this manufacturer, only a slightly different model had to "dance with a tambourine" to achieve a normal hair cut using non-branded machines. Yes, they are relatively cheap, they have a lot some combs of nozzles are often useless a small bottle of oil for lubricating knives. But in the end, the machines either did not immediately cut out of the box or had to spend a lot of time…

I bought a long time ago, she cut well. When I put it in the box, the wire got between the teeth of the nozzle and broke one tooth. I had a haircut for some time, but already the haircut was coming in waves. Then another tooth fell off. As a result, the machine is there, you can not use it. Nozzles are not for sale. BE CAREFUL WITH THE NOZZLE - very thin teeth and break quickly.

Objectively, I can not judge the haircut only once. Machine as a whole pleased. The kit comes with the machine itself, a wire and a brush for cleaning. So far the impressions are great. I'll add a comment later. Good luck to all. . I've cut my hair countless times already. The device is super sharp and does not choke. I filled my hand with a haircut myself, only the neck is equated from behind. In winter, in the cold, I use the machine as a razor, my chin does not go numb like shaving with a…

After a year it works, sometimes I use it. The fact that there is no battery, but a regular cord, is a plus, the battery would probably already be weak. As a result, - the machine for a very small cost slowly, but does its job. Some pros: Cuts well, does not tear hair. On the nozzle, the height is from 3 mm, I tried 9 mm and 11 mm, I am satisfied with the result. After removing the attachment, the machine can be used to maintain a "light unshaven". The machine is small, light, you can safely…

In general, the model is excellent, before it there were about 5 different options, priced up to 2500 thousand, and for this money the 5115 model exceeded all expectations. I've never cut my hair so fast and most importantly, it's a pleasure! Nevertheless, Philips knows how to do the technique. With its pros. Excellent model, light and comfortable, self-sharpening blades. Has some cons Well, maybe the handle is too long, it’s a bit uncomfortable to cut at the back at the bottom, the shoulders…

We have been using this model for more than a year (2 times a month). The nozzle teeth are a little strained. Otherwise, there are no questions. We also have Panasonic ER-131 available (we like this model of the machine more than philips).

More than five years in the family (bought for 1000 in amazon for a promotion), they did not serve (there was no lubrication of the knives), the hair cut is still excellent! I want to buy another one just to have it (otherwise it suddenly won’t)

The payback of this machine for me is already 2 months. operation. The price of the machine, for example, 2022 r Haircut "Sports", which I wear - 300-400 re (in Hong Kong) I cut myself with a 5 mm nozzle once every 2 weeks. I save 800 per month + I also shave with a machine) I leave the bristles half a millimeter. I threw out all the machines, foams, lotions. Forgot about irritation About buying blades and stuff. All with one machine. The average life of this unit is 3 years. Then I take…

The previous Philips model lasted 10 years. Because again took the same company. Unrealistic savings on barriershops :) cut your hair for a year and save on vacation in practice.

I've been using it for over four years. I cut my hair, shave (to a fine stubble) only for her. Almost no complaints. Took for 890.

About 2.5 meters long, the cable is pretty long. It is firmly held inside the connector; it does not fly out. The nozzle's design is thoughtful, it operates quietly, and it is securely fixed. Although it appears frail, it is not intended for shearing sheep (for which greater strength is required). Part that reclines for cleaning plastic antennae. Yet, the plastic is squishy rather than fragile. In any event, I didn't feel as though I may break while cleaning. Yet, I tend to be a highly…

After totaling the reliable old Remington, I made the decision to purchase a new vehicle within my $2,000 spending limit. As I got to the market, I examined every make and model with great attention. The winner was determined to be the "Philips QC5115," especially considering how positive the reviews were. When I first unpacked the machine, the first thing that struck me as odd was how light it was and how it was made entirely of plastic; not only was it awkward for me to grip, but it also kept