Got pros: A solid case, all ports are on top, there is a backlight, a window in the entire wall of the case (it’s a pity plastic and not glass, but what did you want for such pennies) Cons: up close, the quality of the plastic is a little striking and it is clear that the case is not expensive

I am satisfied with the purchase. I installed an additional 7 coolers with RGB backlight, more for beauty, they work quietly at 800 rpm, with my assembly, and this is the GIGABYTE Z390UD mother, the I5 9600K processor, and the GIGABYTE G1 GTX1060 6G video card, the temperatures of all components are normal. The wires from the HUNTKEY 600W power supply lay normally, there was enough space and the lid closed easily. The thickness became normal, why thicker, this is not an armored car!

Got pros: Appearance: If you order a suitable glass, it looks beautiful, a kind of garland for a night light. Of the pluses, I can note the lower basket and the space behind the back cover - it is convenient to remove the cables, when pointing prettiness. Price - an adequate price tag, for 3.0, a bunch of output interfaces and a hassle-free implementation of RGB backlighting Got cons: Well, now about the sad. Cooling. If you have a circuit or a modular LSS, well, all of a sudden, you can not re

Generally good. Of course, it's a pity that acrylic is used instead of glass, but for this money there is no glass anywhere, but it's beautiful.

Different pros: Beautiful, large, there are inputs / outputs on the "muzzle" (headphones, microphone, USB, card reader), additional grilles (logically designed to collect dust, mounted on a magnet, which means quick removal and shaking off the dust). Cons below: a bit tall, pay attention if you have an old computer desk so that it fits in height. I have this case a couple of centimeters higher than the back wall-crossbar, but I don’t reduce points from this, since it’s not critical (but I would

Be prepared that for such a price, the metal of the case will be a little thicker than a tin can. Plexiglas is mediocre, bends. It bends even when screwed on, if you bend it with little effort. I did not check the backlight until I buy additional components. Motherboard Asrock B360m PRO4 climbed without problems, 1 screw was missing from all the fasteners in the lower right corner, because. there is a hole for the cable. Because of this, there are still enough fasteners and the board does not…

For a not very hot assembly, it will do well. But the main disadvantage of this case is airflow. By the way, feel free to ask any questions. I'll answer and help :) Has pros: Bought by us somewhere for 2700r. Everything is easy to install inside. Climbed Deepcool gammaxx gt calmly. Anything more is unlikely to fit. Lots of lighting modes, looks pretty nice. Cons below: The body material is thin. The transparent wall is not glass. (Sometimes websites write that it is hardened. This is not so)…

Different pros: Transparent wall, power supply from below, there are all holes for cable management, backlight Has cons: The transparent wall is unscrewed for a long time, the bolts are very tight and always twist only with great effort

Excellent case, looks like in the photo, there are almost no flaws for its price! I didn’t take it for myself (now inwin 101), but if the metal was a little bit thicker, the glass was tempered and the cover panel for the power supply, I would take it for myself (AeroCool could sell this for 2022 more, calling it the Pro version) Different pros: + Awesome backlight, many modes +Fully covering sidewall + Normal front panel (everything you need is there) With its cons: - The wall looks cheap…

Got pros: Good body! Very beautiful backlight changing with just one click of a button) Pretty ergonomic and roomy. Got cons: Pretty thin body metal In powerful assemblies, even with the maximum number of fans, it heats up like a stove

I took it for the most part because of the design, I was very pleased. Probably the best case for the price. Pros: + Laconic, but stylish design; + Unrealistically cool backlight with different modes, switched by pressing one button; + Lack of space for an optical drive, which is absolutely unnecessary these days (for someone it will turn out to be a minus); + Spacious, roomy, you can stuff a lot of things and still have a place; + Transparent side wall. Cons below: - Glass really collects dust

It is better to immediately buy 5 aerocool rev blue / red / rgb coolers for it, put 3 on the front panel and 2 on the blower, turn it on at full power. They will not make noise, as they are very quiet, but the hardware will become much better. More suitable for p5 3600 and px580 builds. Different pros: Stylish and simple design without pretentious elements in the style of transformers. Backlight. transparent window. The lower location of the block and a fairly convenient cable management. There

Separately, about the quality of materials - steel and the quality of its cutting leave much to be desired. 3 of the 9 motherboard mounts had to be literally screwed in with pliers, breaking the thread. When you try to screw the fasteners with your hands - this same fastener turns and gets up crookedly, at an angle. In general, the assembly of the computer took me at least 2.5 hours, instead of the planned 1 hour.

I decided to change the mATX case for something bigger (the 3-slot vidyaha didn't fit, there was overheating, etc.). I was looking only for a miditower and with a lower PSU location. Hooked this body and from Zalman. The backlight won. And it was only at home that I realized that the optical drive, cooler speed control, hot-swap by 3.5" and so on into the 5.25" bay are in the past. You can put it, but: 1) fasteners on one side only. 2) have to live without a backlit front panel. Disks. There…

Has some pros: value for money just top. very nice case for very little money. Cons: there are only nitpicks, LED is not super, the body is very soft, but for the money it's not scary.

The white model is much more beautiful, as for me, but at the time of buying my black model, it was not available, I took what it was. Has some pros: Compliance of price and quality. Everything you need for assembly - bolts, ties, etc. - is included. Unlike power supplies, they did their best here - the metal is not the thinnest, the case, if shaken, does not bend like foil, there are also necessary holes for cables. I also liked the feature with installing a fan under the video card. I bought…

Actually not a bad case, but if you do not tolerate high temperatures, then it is better to take something without a lamp, but with a ventilated front panel. As for the side wall, it is not made of glass, but plastic, but I don’t care about that. Its pros: Price, Rgb, size, convenient compartments for the power supply and hard drives, the possibility of cable management Has cons: If you have a full size motherboard and a tower, forget about the turntable at the top. The complete turntable turns

Very badly blown. There is only one fan in the kit and in the closed state, even in idle time, the temperature inside rises. Bought 2 more 120mm. I put it on the front panel, but it's useless because there are no holes in it. They are circling the air inside. I added another 100mm to the top side for blowing (120mm rests on the VRM heatsink). It got a little better, but under load the temperature still rises. The upper type "filter" had to be removed as it strongly slows down the air flow. In…

Suitable for budget and beautiful assembly on components that do not require serious cooling, I, with my "stoves" in the form of a Radeon R9 390 and Ryzen 1700x, were overclocked for a month, I bought another case))) Got pros: -price - beautiful backlight, many modes - USB 2.0 card reader (after all, 500, if you buy separately) only the gentlemen from Aerocool are pleased with this - rear bars are removable, no need to break out - overall build quality is decent Cons: -after installing not the…