Has pros: Gorgeous appearance, good ventilation and the ability to install 6 fans, even up to 140mm! Space inside, assemble the system conveniently. A huge plus is the back cover is fastened with convenient screws that can be unscrewed with your fingers) Has cons: The lack of a casing for the power supply unit, the basket for the hdd is too close to the power supply, there were inconveniences when it was necessary to connect another cable

The Schyte Mugen 5 rev. B cooler got up normally, about 1 cm left to the glass. But if you have a healthy 165 + mm fool like Deepcool Lucifer V2, then check it for height in advance. Also, if you plan to put coolers on the front panel, then think about a pwm splitter cable or extension cords, because. they are quite far from the motherboard. Different pros: BLOW For such money, I did not find a case with such space. Well threaded bolt holes throughout the body. Large space for cables. Lack

Its pros: Tempered glass Plenty of room for cable management Quality materials for the price beautiful backlight Cons: - inconvenient connection of fans. - there is no buffer for dampening vibration on the HDD mounts.

I took this case paying attention to the reviews and the price, the budget was limited, I took it only as a temporary solution. CBO got up like a native without any problems, put Corsair Hydro Series H115I RGB Platinum 280mm. The motherboard rested almost against the PSU and there was a problem with connecting the cables, I had to pull them and somehow make sure that nothing sticks out, it turned out so-so. The wires from the PSU rested against the basket from the HDD, barely shoved them in…

Pros below: I originally took it with coolers inside (4 pieces, backlight, deepcool). Plenty of space inside and at the back for cables. Different cons: It is difficult to remove the front panel to clean from dust or pet hair. For some it will be wide

Advice! Check the height of the Cooler Tower, it worked out for me =))))))) First, we put the motherboard and see where the video card will be. we remove the motherboard and in TORMENTS we try to break off these iron holes. After we check the bolts and put the missing fasteners on the case (extension bolts), then we put the motherboard and fasten it. PS: I heard that you can not put the video card sideways, did not check it, but there are no mounts in the kit. I did not attach the fans, I can’t

Big Zalman bp did not initially get up. Reason: rigidly (on rivets!) fixed basket under the HDD. The question is for the designers, of course, but the cheapness of the case justifies this strange quirk. 3 minutes of work with a drill with drilling out rivets and you can safely move the HDD basket where you need it and put the power supply unit of the right size. The place for dropsy is organized very conveniently, flexibly, practically does not block access to the connectors at the top of the…

Great body for a modern build. With its pros: Price Material quality Aesthetic appearance (durable knee glass, backlight) Plenty of room for cable management Convenient location of external USB and power button The presence of quick-release dust nets (very practical). Some cons: The reset button could have been dropped. There is a chance of accidental pressing. In my opinion, the inconvenient mounting of peripheral devices (video card) on the rear panel.

To install the lower front vent, you need a tiny screwdriver, about 5 cm long. As a result, I had to clamp the nozzle on the screwdriver with pliers and twist it like that. Even at first I could not understand how to remove the front wall in order to install the vents, it turned out that it was necessary to simultaneously compress several plastic "rivets" (there is not a word about this in the instructions). Also, the front vents are not in the center of the glass, but in the center of the case

I assembled a computer for the first time, initially I didn’t plan to spend so much on the case, but then I decided that the case is not something that I will upgrade at all in the future, so it’s better to immediately buy one that pleases the eye. For a long time I chose one that I liked, but almost all of them are either ugly or with poor ventilation. At first I thought about taking a version without fans and RGB, but in the end I realized that if I then separately take fans that can adjust…

This case is not bad, and will live up to expectations for the most part, but it falls short of the ideal, at its price. Some elements could be improved without the price increase. Design for lovers of RGB fans and glasses, but the built-in backlight is nothing more than mediocre, "whatever it is." drive mounts are poorly designed. In general - to assemble a computer, adjust the backlight so that it does not bother, and use it - it is quite suitable. Thoughts when assembling the computer were…

Despite the solid front wall, cooling is very well organized. I assembled a silent system on the Intel Core 12400. Even without an in-case fan, the temperature under load does not exceed 58 ° C (despite the fact that the processor fan operates somewhere at 65-70% of maximum power), in idle - 42 ° C at minimum speed ( if you increase to medium, you can achieve 35-36 ° C). An interesting feature: the activity of the hard disk is shown not by a separate LED, but by flashes of the power button.

The case is 5/5, there are other disadvantages (as well as pluses) of the case, but they are not significant (for example, the glass gets dirty, etc.). Unfortunately, I can’t test it in work yet, I’m waiting for other components that will arrive within a month. As soon as I launch I will add a review. for smart people. The photo shows components for a PC, I don’t use them because they are very outdated (from a computer in 2022).

By blowing: Even without case fans with 2 processors of 115w tdp each and a video card from the reds, after a couple of hours of loads, the entire filling showed 65 ° in unison. Has pros: It doesn't look fancy. normal hardness. Not exactly wow, but good. The glasses are tinted - the backlight of the rgbt components does not burn out the eyes. Purge. Cons: When installing the E-atx format board, the mount for 2.5 ssd overlaps and remains to be placed on the slide. There are only two slides.

In general, the case is not bad. Backlight, glass, magnetic overlay on top of the grille. The size is not so small. Disadvantages mentioned above Pros: Roomy case, beautiful and all that . You put backlit fans and in general beauty. The wires are all neatly routed behind, there is plenty of space Cons below: It is almost impossible to screw in the lower fan (far lower corner) because of the "receiver" for hard disks (the distance is about 3 cm). Moreover, the receiver is not removable, on…

It was a pleasure to assemble the system. As a constructor with normal quality parts. No saw cuts, no slots, no additional screws - everything is in its place, the set of fasteners was enough. With its pros: Using a lot of glass. The use of durable metal inside the case. Simple and fast installation of fans. All fasteners for my motherboard were found. LED insert on the front panel, a button to control the effects of its work. Has some cons: heavy system unit after assembly. Before assembly - 7

Different pros: It looks great, any modern hardware will fit, cooling is on top. Different cons: 1. The HDD cage is NOT REMOVABLE, so the lowest front case fan does not fully cool the graphics card. 2. There is no way to install the video card VERTICALLY.

Different pros: Beautiful design, convenient placement of HDD, there are holes for cable management Its cons: In order not to damage the front panel, you need to very carefully open the front cover, there is a small air intake in front

I do not need all these newfangled bells and whistles like glass doors or water disco. I needed a simple inexpensive case. Basically, it will. But it is inconvenient to take it, and because of the glass, there is always a fear that it will break. And on the back wall there is some kind of "extra" detail, which I could not attach to the place, so I just threw it away) well, to hell with it)

Positive points: - Initially, when I chose it, I liked the design, the front panel is made of transparent plastic (maybe glass) with RGB backlight (cloudy white stripe), the side panel is made of glass. - I liked the dimensions of the case, very large, and therefore it is well ventilated. - Due to the absence of fans and PSU, the price is acceptable. - The second wall of the case (right) is made of metal, there is a lot of space under it not only for wires, but also for HDD hard drives (they…