I am assembling a top-end car, I thought I would take an empty beautiful body and make a candy. It wasn't there. The valves do not climb, the wires do not reach, the threads are poorly passed, there are no shock-absorbing pads for the hard drive in the box. I'll have to change, sorry for the money spent and the waiting time. I do not advise. Yes, and the front cover is not hinged, junk in general.

To assemble a gaming PC, in principle, an acceptable option, but you need to complete it with coolers. Pros below: Plenty of internal space convenient location of buttons if placed under the table possibility of installing water cooling built-in lighting glass panels on the front and side covers the ability to correctly organize cable management (wiring layout) laid wires practically do not interfere with the appearance of the iron installed inside Cons below: The ability to install a total of…

As you can see from the picture, I'm not really a gamer. But even so, I didn’t have enough space to hide the wires. Perhaps (yes, most likely it is), I just have crooked hands. It's scary to imagine where I would hide all this if I had 2 Titans there. 2 propellers in the photo are not from the kit, I bought the "minimum package". I took all the available places under the SSD, there was not enough space to push the cables back. Noctua NH-D15 did not fit right away, I had to lower the…

For the price, it's a great case. It is blown well, despite the glass in the front, the side openings give enough space for air intake. In the kit, they gave as many as 2 bags with accessories for every taste, racks, case screws, screws for the mother and power supply, everything is there, in double quantity. I don't know if I'm so lucky or it's like that everywhere. There is plenty of stowage space in the back, with the CHIEFTEC GDP-650C block, with its rigid cables, he stowed everything…

Has pros: Price - one of the best cases in this price segment. Convenient cable management Got cons: When installing the motherboard, you have to hold it on the back side, inside the wall is about 0.4 mm.

I bought this case primarily on the basis of a budget of no more than 3k, with the help of the company's marketers, advertising and reviews of which are many on the network, the guys work) The first thing that caught my eye was the huge space inside with standard sizes. Very easy to mount everything. Secondly, the side cover is gorgeous, all the wires hide behind it perfectly. Well, glass is also nothing) The holes in the case for wires are very well thought out, I really liked it. The tower…

The price tag seems to please at first, but keep in mind that you will have to buy at least 3-4 coolers additionally, and this is 1500-2022 thousand on top, and for the cheapest ones. If you collect with soul, then for a set of 3 coolers with backlight in the front wall, 2022-4000 thousand, one more at the back and two at the top, i.е. another 1500-3000 thousand. In total, 8000-11000 will come out with the case, depending on the chosen coolers. It turns out not so cheap as it seemed at first…

Unfortunately, I did not notice that there is no casing for the PSU, otherwise I would not have taken it. But there are two glasses. Bought for 2500 somewhere, so more or less the rules. In another case, it is worth taking the v3 version, where there are still fewer jambs. Pros: Two glasses. E-ATX. RGB strip is nothing like that. Plenty of room for cable management. Some cons: Lack of casing for PSU and hard drives. Basket with hard drives on rivets. No dust filters. Disposable plugs on the…

For its price (3 in 2k18) a very suitable option. But there are several nuances: - thin metal makes noise like a drum - it is not possible to remove the front cover for mounting the "water" behind it on the front panel - there is no way to disassemble riveted or soldered. All of the above shortcomings are compensated by direct hands and the desire to make a case for 6 from a case for 3, saving and putting aside for the purchase of a video camera for 150! oh, this is 2022) =)

I chose among buildings up to 3 thousand. For this amount, Matrexx 55 seemed to me one of the most interesting options. The case has a minimalistic and stylish appearance, excellent quality of materials processing, good capacity. Noted tempered glass front and side. Good ventilation - in the front of the case there are wide side gaps for air intake. After a small mATX case, I wanted to give more airflow to the components. Space for cable management behind the rear wall is plentiful, about the…

In general, I am satisfied! Different pros: 1. Beautiful appearance. 2. Build quality: parts do not play, do not rattle, do not bend much under the finger. Lots of holes and openings inside for rear cable routing. The metal cuts are not sharp, but rounded. 3. The case itself is heavy and strong. The side walls do not rattle and fit snugly. Even with a metal thickness of 0.6 mm, the Matrex does not lose in comparison with my old case, which had a metal thickness of 1.2 mm. 4. Very good…

You can tear off the dusters and attach a better mesh to the valves. But not for hot iron. Be careful. The sellers put up pictures from MESH, which I screwed up on. Deepcool in 2022 sent out a case called "MATREX 55" to reviewers. They actually had a MATREX 55 ARGB with a 5v controller. If there is no ARGB inscription on the box, then it will be an RGB version with a 12V connection.

I really like the case, it's stylish. All these shortcomings appear only during assembly, the operation itself without comment. Has pros: Appearance Separately, I will mention the glass side and front covers A lot of space inside, there is a reserve for future modernization RGB controller built into the case, my motherboard does not support RGB, I connected the fans to the controller in the case (the one that controls the color of the strip) With its cons: Small windows for SSD wires. I had to…

The case is large, voluminous, heavy and rigid, I am pleased with the opportunity to cram 5 fans for 140 and one 120 for the rear blow (or you can put everything on 120), it is possible to make cable management humanly, it strains the large glass a little on the left, despite the fact that that it is aesthetic and feels quite solid, darkened just a little bit, so that you can easily see the tracks on the motherboard. A very big and fat minus is carving. The Chinese did not bother to cut it or…

Great model. In some things, the manufacturer made a compromise and savings, but still the product is of high quality. Pros: Side window made of tempered glass and the same glass on the front panel (non-removable). Deep, therefore suitable for high cooling systems (coolers). All holes inside the case have bent edges, so it’s quite difficult to get hurt. Multimode lighting. Convenient location of the power buttons, etc. (the contour of the power button is highlighted). Lots of room for wiring…