On AM 4, a very simple installation, easier than standard. Good pressure to the processor and a flat sole. Compared to the gammaxx 300, the ryzen 5600 at 4.6GHz was 55 degrees in the cpu-z stress test, the 300 was 67 degrees with 100% fan.

Good tower, easy installation, with Ryzen 5 3600 + MX-4 the idle temperature is 32 - 34, in games it hasn't reached 60 yet, Aida's stress test is 60. The fan itself also attaches very easily with brackets, without effort, a big plus - spare brackets and the ability to put a second cooler on blowing. I supplement - above 900 the tower emits an unpleasant clang, the fan has nothing to do with it (I tried it), the matter is in the plates, it is they who make this sound from the air flow. it can be

Cool cooler, did not expect. The 5700X cools decently and digests even 150 watts of heat (but with an uncomfortable howl of the fan and a high temperature during the stress test), which, however, was decided by tuning the processor settings - if you throttle it by voltage, then everything is OK and the cooler is more than enough right away becomes even under load. Up to 1000 rpm it is quite quiet. Bought out of greed, because at a discount. Well, let it be, the stock does not pull the pocket…

An honest radiator for your money, perfect for Hong Kong or not very hot Intels. It copes with its tasks, the platform is flat, the valve is quiet. Apply thermal paste correctly: I overdid it at first and the processor did not cool well. The second time I put a drop in the center, pressed it and everything was a bunch. Perhaps the complete thermal paste is not very good, the second time I applied some old one from aerocool

I fell for the laudatory reviews of the estate resources and was extremely dissatisfied with the purchase - I had to buy a turntable, which added noise. Curve proschadka and overall performance disappointed. 65 watt ryzen cools, but to keep 70+- degrees at MX-4, when rendering, the turntables will go above 1500 rpm, even with undervolting. The complete paste is straight pasta, super thick. Look better at more expensive options (I have already doubled the price with additional turntables and…

Proc with a heat pack of 120 watts, on a stress test, cools. It seemed to me with a good margin, because. The turns of the turntable were about 2x thousand.

Has pros: Quiet and efficient enough for a 10th gen i3, allowing the fan to turn off temporarily when there is good ventilation. Has cons: Under socket 1200, I had to climb behind the motherboard for installation, it’s not very convenient, unless of course it’s not installed in advance but later, like me.

Has pros: Satisfied with the product. The temperature of 5600x during games keeps normal. Not noisy Cons below: Thermal paste applied at the factory is not very good quality

Some pros: Nice tower, great power dissipation. Good cooler speed. Four heat pipes for the price. Looks stylish. With its cons: At high speeds, it behaves noisily (I'm used to silence). Haven't found any cons yet.

I am satisfied with the purchase, taking into account the bonuses I bought it for a penny, it does an excellent job with its work, the i3-12100F processor does not heat up more than 55 degrees, not in games, not in stress tests

Excellent, very attractively priced cooler for processors with medium power consumption. It's made without unnecessary bells and whistles like RGB fan lights and other nasty things, the money is invested in really important things, such as polishing the base. Its pros: Attractive price (I took it for 1310 here at NM); Surprisingly well-crafted blade for the money. Not to the specular sheen of a $4000 supercooler, but much better than usual in this class; The fan is not noisy at all, as some…

On the one hand, I was pleased that the cooler came in an ated configuration with support for the 1700 socket, but the minus here is that this plate has become noticeably thinner. So, if you take it for old sockets, it might be worth looking for the old version or even taking it from your hands. The fact that the performance of the cooler is greatly overestimated, I think, will not surprise anyone, judging by the stress tests of the Core i5 11400f (on the bundled thermal paste, which is even…

This is not the first time I use coolers from this company, the quality and cooling are always excellent. I don't use the included thermal paste.

Different pros: The turret is a bomb, especially when you get it for a ridiculous price of less than 1.5 kilos. Different cons: The rolling of the tops of the tubes is not very neat, but these are trifles.

Got pros: Quiet, with the ability to install a second cooler (there is a mount included). I can handle AMD Ryzen7 5800X cooling. Its cons: If there are funds, then the main cooler can be replaced with a more productive one. Get minus 2-3 degrees (may be desirable for poorly ventilated hulls).

I will immediately give general characteristics, maybe someone needs it: AMD Ryzen 5 3600X; RAM 32 GB; Motherboard COLORFUL A320M-K PRO YV14 (AM4, mATX); Power 750W; Vidyuha Palit RTX 3060 12 GB OC Dual; Case 1STPLAYER RAINBOW R2 - look at the specifications in Google; I bought MX-4 thermal paste, I did not use the thermal paste that came with the cooler. At first I was afraid it wouldn't fit. As a result, there was enough space in height, even with a margin (the case allegedly supports 170…

And so the cold ryzen 5 2600 does not heat up at all under it. In idle 31 degrees as on the second computer with dropsy with the same percentage. I was very pleased. True, I did not expect that it would be so massive, of course I did not look at the dimensions, as a result it looks out of the case, well the lid can close slightly bending) Pros below: It's very big, it's just huge, solid heavy with 4 heat pipes. Thermal paste included Cons: Of course, I may not understand something, but the…

Its pros: Convenient fastening Good thermal paste included, you can see its comparison with others on the Internet It does not take up much space in the case, which allows you to reach the power connector of the processor in the already assembled case and freely remove / stick it in Absolutely calmly cools the i5 11400f, with the bundled thermal paste it never gets higher than 60-65 in games, tests with abc instructions can heat up the percentage somewhere up to 70, but not higher Has cons: Noi

After installing 2 quiet powerful fans, blowing with high static pressure, the temperature was reduced. The notched profile of the radiator, which, as if to reduce resistance, creates gaps at the top and bottom and leads to the fact that the air flow deviates at the radiator inlet, it was necessary to cover it with masking tape, which made it possible to lower the temperature by at least half a degree. In general, for a power of 140W, it is clearly rather weak. But, perhaps, in its price…

There is a zalman with 6 turntables in the case, and . it is louder than all of them put together by about 2 times. Now it is on i5 11400f with undervolt and does not give out more than 85 watts during the stress test, in such conditions the turntable spins up to 1400 rpm, the feeling that you are standing next to the aircraft engine I took it for about 1400, now it costs some unthinkable money, its price is no more than 1000 If you decide to take it, then change the turntable on it or look…