Cooler for ID-COOLING SE-226-XT ARGB processor, black/ARGB Review

The price tag is just super, this model comes with two versions with ARGB and without ARGB, the price of the cooler starts from 2400 which makes it an excellent competitor to many models of this level. Ask for advice, in MSC I can help you decide on the assembly, photos of my work.

I bought this cooler to replace my current Id-cooling. I do not remember the exact series, but it is smaller. It has 4 heat pipes and a TDP of 130 or 180. Rather 180. In general, I took it in 2022 for about 1.6-1.8 thousand. And what do you think? After removing it and installing a new one, I was able to compare them and come to the conclusion that id-cooling has gone bad! The amplifier is lighter, smaller and more flimsy. the bolts that attach the rails on which the cooler is installed are…

I advise everyone, it fit perfectly into a case designed for 160mm, with a small margin, so if you have mAtx cases, take it, there is a cutout at the radiator on the left Quiet, keeps the temperature well, the stress test of Aida is 51 degrees (it rose to 55 in 15 minutes), before that there was a boxed processor cooler for a couple of days, the temp rose to 100 per minute and the fan was spinning at 3200 rpm and naturally there was noise, and here in the test 1500 revolutions, without a lid…

For little money, a 6-tube cooler with controlled lighting and a 120mm fan is a good deal. As for its main task - judge for yourself - on the Ryzen 5 5600X in the OCCT test, the processor temperature is 85 degrees. And this is with factory overclocking. If you take it for quiet work, video, Internet and games with normal settings, then yes, it makes sense. If the processor is "hot" and you need "extreme overclocking", then take dropsy.

my system: i9 11900kf (xmp profile enabled), rtx 3080, 32 ddr4 3200. In AIDA64, during a stress test, the CPU temperature showed no more than 91 degrees. very good result for this type of cooler. in general, completely satisfied)

Excellent chill. Like everyone else, I will say about a screwdriver - it is not included in the kit, it will not be possible to assemble it from extension cords, the window is very narrow. We are looking for a ph1 screwdriver with a length of 15 cm.

Great cooler! Much better than the past, which I was advised in the CSN (Gammaxx 300) I cool the i5 11400f under the most terrible tasks and the temperature does not rise above 80 degrees, at rest 30-35, I consider this a success! The main thing to keep in mind is that the Tower is quite long, otherwise it will be like mine (see photo) Some pros: excellent cooling easy installation Rich equipment Appearance Ease of setting the backlight (from a computer or physically from a button) Design…

Some pros: Silent, high-quality, there are mounts for most boards, it glows. . . Its cons: Some tightening nuts can be over tightened and they will start to scroll along the thread (be careful)

Its pros: Big, beautiful, looks expensive, can be quiet, can be noisy. With its cons. Inconvenience of installation, you need a long screwdriver. The sole was damaged. I didn’t hand it over, since it is unlikely to affect the characteristics, but not in a buzz.

Good, but thick paste included, difficult to smear. I think if you just drip, it is unlikely to be distributed normally. There is nothing to compare with the noise, it is noisy compared to the previous gammamax v300, but there the turntable is smaller and it was on a different assembly. With its pros. Included are mounts for lga 1700 with up-to-date detailed instructions in 2022, which pleases. Cools 12600k, in Hades the temperature is kept at 65-66 degrees. The only thing is that I still have…

Bought for a Core i7-12700kf stone (in turbo heat dissipation 190W). Some kind of left program from the motherboard loaded the percent at 100% for several hours, the temperature at the peak was 82 C. Under normal tasks, it keeps the temperature at 36 C at 13% of the maximum speed. If it was silent at low speeds like my arctic case coolers, then it would be perfection itself! lgbt backlight works, is adjustable, turns off in the software from the motherboard, in general, it looks good.

I was a little surprised by how heavy the cooler is, it cannot be compared with the Gamax 400. The material is not bad, the fan is good in quality and in backlight. I would like to add to the comments below about the screwdriver. She's been added to the package! ))). I bought a separate 200mm screwdriver, but it turns out that it is no longer needed. So don't worry about it :)

there are no problems with the installation, for 2 months there are no crackles of the turntable, it works properly, the backlight is synchronized in Asus-Aura, I bought for an Intel Core i7 12700 this processor calmly pulls, when I bought it I drove 11min in OCCT-Linpack, the temperatures were mostly 77-79 in the standard OCCT test, the temperatures are even lower than 55-59,