Dayco 80304 Fuel Fill Hose Review

Ideal for a 1993 Airstream land yacht on a P30 chassis. The old one was dry, cracked and leaking. Easy repair to be safe and ready for another 30 years. Measure because diameter is critical.

This is a fuel hose. He's big and fat. That's a gas hose. I don't know what else to say. He's damn tough. I haven't even installed it yet, but I mean, again, it's the fuel hose. So a good job seller. Rschunimagu.

It's a bit difficult to bend but it was the perfect solution as Isuzu doesn't make fuel hoses for Amigo. In fact, nobody does! Steel reinforced and tough, a car should survive.

Worked great! Trying to fit the gas tank was almost a nightmare, but this hose worked exactly how we wanted it and gave us an idea of what the fuel line actually was. The last guy to fix this 1984 truck put an old radiator hose on. It was very difficult to find a fuel line of this size and I'm very glad we did it. Very strong and a bit difficult to bend but it worked for our truck. We measured the length it takes to get from the filler neck to the tank and cut it off with a hacksaw and heavy…

Very strong fuel hose. It is rigid but has some flexibility and is reinforced with wire. The inner diameter of the hose is slightly larger than 1 3/4. My gas tank is rusted at the bottom bend. and leaked when filling with gas. So I removed the filler neck and cut off the rusty part. I then cut the correct length of this fuel filler hose so I can connect it to the horizontal pipe that goes to the gas tank. I would have brought a new fuel tank but I couldn't find it. This was for a 1995 GMC Rally