🚗 Daystar Jeep JK Wrangler Lower Switch Panel - Black, Fits 2011-2017 2/4WD Automatic Only, KJ71034BK - Accommodates 1-5 Rocker Style Switches, Made in America Review

After sitting on my desk for a few months, I finally installed the control panel on my 2014 Jeep Wrangler Unlimited. The only thing I don't like is that the 2 top clips didn't stay in place as advertised. I had to glue it with cardboard and press firmly. He didn't stay straight. Yes I used the factory orange clips but it didn't work. Also, when inserting the 2 bottom holders, make sure you push very hard until you hear a click, otherwise you will never attach them.

This appears to be a well made switch panel and I'd love to see it work. I have a 2010 Wrangler with a manual transmission so it doesn't work for me. Nowhere in the description before I bought it did it say it wouldn't fit. Apparently it's for 2011-2015 Wranglers and only for automatic transmissions. As this information should have been in the description or in the pictures I decided to do some basic work for Daystar and post a picture of the box you will receive. * Look for the asterisk on the

Item does not fit 2017 Jeep Wrangler Unlimited without major modification. The product broke trying to get it to work. He became useless. The corner bearing inserts are significantly smaller than standard and have no leeway (unlike standard components). If you are dying to use this product, I recommend scraping the bottom loops to match the stock spacing. Also, expect swapping out standard tool components to be frustrating. The orange bars don't stick very well to the Daystar and lag behind all

I bought this for our 2016 jeep wrangler. At first glance, it looked very nice with high quality plastic and a clear texture pattern on it. Once I placed the Daystar panel next to the factory panel I was even more impressed as the texture pattern and colors were accurate! Installation was easy, in fact the hardest part was removing the factory fairing as it has a lower molding. hidden under the lower console. But once that was removed, the factory mounting brackets were very easy to remove from

I have a Wrangler '06 TJ and like all Wrangler fans, I have trouble locating the switches. This panel is a great design as it can be tailored to fit the TJ (although it wasn't designed for this purpose). If you cut the switch bezel to the same width as the plastic windshield side trim it will fit perfectly and have a nice finish. The cut end faces the windshield and is not cosmetically visible. You can use 4 OEM screws to fix it to make it look like OEM or alternatively use construction glue to

First of all I have to say that this product serves a rather pleasant purpose. However, this is not ideal. It looks quite similar to the OEM, replacing a useless piece of plastic with mesh. I wish they gave you little plastic clips but you have to remove two from the factory fairing that you remove. Be careful not to break the small plastic clips as they are quite small and not easy to remove. I had to modify this panel a bit to make it fit. You will likely have to do the same as other people…