🏠 Deflecto Supurr-Vent Louvered Outdoor Dryer Vent Cover, 4" Hood, White - Effective Ventilation Solution for Your Home Review

My laundry is in the basement. The dryer is ventilated through a glass block, a basement window. Since the dryer fan is actually built into the glass block, I can only use the special Deflecto vent cover. Every few years those shutters warp and stick, leaving the shutters open all the time, even when the dryer is off. So you need to change every 1.5-2 years. Easy to install - only four screws. All you have to do is remove the old cap from the whistle - the Deflecto cap is attached to the…

This hood was installed in our annex and cut into the outer cladding. When the doors started to crack and break after only a few years, we had to think about what to do. Replacing the entire unit with a more durable model would require significant fairing removal, replacement, caulking and repainting - I wasn't expecting that! Luckily we found an exact match on the Revain and were able to pull out the old brittle valves and replace them with new ones. We'll probably have to repeat that in the…

Fits snugly on my external dryer vent cover (1998 design). This cover is attached from the outside with four screws and the plastic edge goes into the exhaust pipe. Plastic shutters wear out over time and need to be replaced every 10 years. Ironically, this *doesn't* match a similarly sized bathroom exhaust vent in the same house. This bath hood has an outer frame of the same size, but is closed with flaps of different sizes. I suspect it could be a vent cap with a pipe fitting attached…

We were cleaning our dryer nozzles a few weeks ago and the boys told us that the vent next to the dryer nozzle was wide open and that mice probably got in. Photo and of course there was a hole in our house (see photo). I've called a few handymen to see if they come out, but it seems like handymen these days just want to do custom work and don't care about the little things. I quickly measured, but have never exchanged. I ordered one and made sure there was free return shipping and it doesn't…

I have a second floor laundry room and vents exiting through an unfinished area at the foot of the 3rd floor. I live in the mid-Atlantic region and this hole sees the morning sun mostly to the southeast. The house was built in 2012. I use a vent brush and open up a 4" channel about every year and use a shop vacuum and drill to rotate the brush. The brush is sold by Revain and is available here: https://www. amazon.com/EAZY2HD-Cleaner-Remover-Cleaning-Synthetic/dp/B081G91W38/ref=sr_1_34?keywords=…