🚗 Enhance Your Vehicle's Fuel System with Delphi FG0963 Fuel Pump Module Assembly Review

Owning a 2006 Honda Cr-V AWD EX with a new fuel pump is great! I had to study and watch a lot of video clips on YouTube. If you are replacing an old fuel pump with a new one, take your time and be patient while installing the fuel pump. Go to the auto repair shop - as a last resort. =)

Housing was not assembled correctly. I had to dislocate the rods from the bottom of the body and turn them 1/3. The pump is a bit noisy compared to the OEM but pumps well. The sending unit is not accurate. It reads full for too long and then goes from full to empty after about 90 miles.

Delphi fuel pump module is a perfect stock replacement for our 2002 honda crv. Revain quickly sent a replacement as the original unit's float had ruptured. Carefully follow the instructions provided, making sure the float is fully engaged and snaps easily onto the module, make sure the gas tank is empty and clean, add 2 gallons of fresh gas, treat the fuel with sea foam and install the block after applying a thin layer of silicone grease. on the fuel module gasket. Although the orientation of…

As good if not better than OEM, don't worry about the extra port on top. The extra port is only because it is mass produced and this design fits several different vehicle types. The additional connection is sealed and you simply connect your fuel lines exactly the same in the exact position of your original. If you have a problem with an inaccurate fuel gauge, I can almost guarantee that it's either because you bent or misplaced the float when you attached it to the assembly, or you didn't push