Enhance Your DEWALT Miter Saw Experience with DWE575DC Dust Collection Adapter! Review

Ignore what is written in the item description. This dust mount is SUITABLE for DCS570, although installation is a bit tricky. The top screw is installed normally. Access to install the lower rear screw into the plastic bracket is closed by the battery holder. I didn't have a Phillips offset screwdriver, so I used a loose Phillips bit and a flat 1/4" 12-point wrench. It took some time, but I unscrewed the screw. If you have a $100+ circular saw If you have dollars that needs a dust mount, you…

Got this for my DeWalt DCS570 20V XR circular saw. It fits, although it's not specifically listed as a compatible model. One of the screws on the bracket needs to be fitted with pliers or something similar as the screw head is not accessible (at least on my model), you can see what I'm talking about in my photos. I use this nozzle with a DeWalt HEPA extractor and it minimizes dust very well. Dust still flies out the front of the saw, but it's a huge improvement over not having it. Quick release

Just received and tried it, works great with my Dewalt Power Detect DCS574. I would say it gets about 85-90% sawdust out of the cut when connected to my Dewalt vacuum. It's basically 2 clamshell halves either side of the rear dust hole that bolt together and don't get in the way of cutting at all. However, screwing in screws is quite difficult. You'll need a very good quality Phillips #1 screwdriver with a shank at least 5-6 inches or so. Luckily I have a Tekton set with a good grip to apply…

I don't know why the manufacturer says this one doesn't fit, it fits perfectly. It looks lost in the photos but it isn't, the gaps are due to the thing not really fitting together as snugly as it should, there's a surprise. Be sure to install the metal plane included in the kit, bending it outwards to match the collector. It's comfortable, doesn't wobble and I've used it, works great. Whether it's ideal for vacuuming, no, it never is, but it vacuums maybe 80% and, more importantly to me, picks…

My DCS570 circular saw came without a dust bag attachment. This one fits perfectly. I assume this would work for the Flexvolt variant of this saw as well, as they are mechanically identical on the outside. Installation was pretty easy. You do NOT need to remove and reattach the lever on this saw - it is actually the same lever that is already on the saw. I think older models of the saw had a longer guard lever that needed to be replaced. Remove the battery. All I needed was a screwdriver to…

Suitable for the new radio model DCS578 (FINE) and also for DCS575. I have both saws (which is admittedly silly as they are identical except for the motor). It works MUCH better than nothing, but don't expect it to be like a Festool vacuum. You will still have a lot of dust on the floor. The hole on the side is a good idea so you can use it when you're not near a dust bag or vacuum and I use it with a piece of tape over it. I'm glad I got it, but I wish there was a circular saw with an…

This dust collector extension was designed for other Dewalt products but fits their 20V 7-1/4" circular saw. I mounted it in the dust outlet area of my saw and found that the information I was looking for was pretty accurate, wouldn't be a complete solution but much better than without it. It attaches with little difficulty but leaves an open connection on one side. I found it to fit one of the vacuum hose fittings I have there, but noticed upon testing that the hole in the saw guard should be…

Okay I haven't tested the dust collecting ability yet, but anything vacuum related should be useful. The main reason I am writing is to show how this can be modified if you are a DIYer to fit other Dewalt saws. DO THIS AT YOUR OWN RISK AND RESPONSIBILITY but I thought it useful to show the dust extraction for the DCS570 circular saw with the DWE575DC adapter. It has the same shape as the DWE575 circular saw for which it was developed. Dewalt claims that the DWE575DC is not suitable for the…

Works great with the dcs575 FlexVolt saw. The adapter has a hole for a dust collector so the chute will work without the dust collection suction hose installed. When using a hose I like to tape off the opening of the gutter if I'm not using a powerful vacuum and the dust extraction works even better. It would be nice if there was a lid that could be opened and closed. I usually use a Dewalt cordless vacuum and then I tape up the hole. It is easy to install on the saw, although the drawing in…