🔩 Eazypower 81292 Hanger Bolt Driver 5/16"-18 Thread (1 Pack) - Efficient Tool for Hanging Bolts Review

Hanging bolt consists of half screw and half bolt. They are ideal for several specific applications. They must be crafted with a hex piece in the center in order to use a wrench. But I can only find them when different strands meet in the middle. So I figured a screwdriver like this eazypower would be the perfect solution for driving a screw section into wood. They are available in different sizes for each specific bolt thread pattern. I needed one for 5/16 thread which I ordered. Although he…

Suspension bolts are stripped as the threads do not go through the barrel. Even if you hand-drive 5/16-inch steel screws into a large pilot hole in soft pine, this tool will strip the thread as it pushes the screw into the unthreaded portion of the barrel, leaving a strong, well-placed steel dowel that must be removed with heavy pliers. You can tighten 5/16" bolts yourself by tightening the two opposing nuts on the end of the bolt and using a socket wrench in place of this tool. However, the…

I agree with other buyers who have stated that the tool drives the screw into wood but cuts the screw's threads by about 1/4 inch, rendering it unusable. I bought this to install hangar bolts in the legs of an agricultural dining table so I can remove the legs from the table top. It is important that the bolts are installed perfectly straight in the leg on the first try or there is a risk that they will ruin an expensive table leg. I thought about this tool. It would have at least made it…