🚗 Envelope Style Trunk Cargo Net for Chevrolet Bolt EV - Best Fit for 2017-2022 Models Review

It works and does the job, but the elastic straps aren't very strong and the plastic hooks themselves probably won't last long

High quality, comes with the necessary hooks that screw into the holes behind the connectors in the case. 20.00 vs 70.00 for OEM. To install, use a drill to drill a hole in the center of the non-removable connector in the case and screw the hook into the hole.

The screws supplied do not fit in the holes in the stud. You can find a solution to this problem, but the real problem lies in the size of the cargo network. If you don't have an optional raised floor installed on the Bolt, the grille simply hangs in the air without touching the trunk floor. Placing heavy objects in the grille will put a lot of pressure on the screws. I will be returning this and buying a universal luggage net that is larger and touches the trunk floor.

It works and does the job but the elastics are not very strong and the plastic hooks as such will not last long in my opinion

High quality, comes with the necessary hooks that screw into the holes behind the plugs in the case. 20.00 vs 70.00 for OEM. To install, use a drill to drill a hole in the center of the non-removable connector in the case and screw the hook into the hole.

The screws included in the kit do not fit the holes in the screw. You can find a solution to this problem, but the real problem lies in the size of the cargo network. If you don't have an optional raised floor installed on the Bolt, the grille simply hangs in the air without touching the trunk floor. Placing heavy objects in the grille will put a lot of pressure on the screws. I will be returning this and buying a universal luggage net that is larger and touches the trunk floor.

On my 2019 Bolt the spot where the right hand hook screws in is only 1/4 inch deep forward Them. encounter with metal. The screw is about an inch long so I had to cut most of it off to fit. It would be better if the screws were shorter since the plastic pad that holds the net in place isn't thicker than 1/8 inch anyway. In any case, now it's holding up and looking good. I would recommend this kit if you are comfortable with machine drilling and sawing/cutting a screw.