Header banner
Revain logoHome Page
🎯 high precision eryone filament 1.75mm ±0.03mm printer: a superior printing solution logo

🎯 High Precision ERYONE Filament 1.75mm ±0.03mm Printer: A Superior Printing Solution Review

3

·

Very good

Revainrating 4.5 out of 5  
Rating 
4.3
🖨️ 3D Printing Supplies, 🏭 Additive Manufacturing Products

View on AmazonView on ЯM

Media

(4)
img 1 attached to 🎯 High Precision ERYONE Filament 1.75mm ±0.03mm Printer: A Superior Printing Solution
img 2 attached to 🎯 High Precision ERYONE Filament 1.75mm ±0.03mm Printer: A Superior Printing Solution
img 3 attached to 🎯 High Precision ERYONE Filament 1.75mm ±0.03mm Printer: A Superior Printing Solution
img 4 attached to 🎯 High Precision ERYONE Filament 1.75mm ±0.03mm Printer: A Superior Printing Solution

Description of 🎯 High Precision ERYONE Filament 1.75mm ±0.03mm Printer: A Superior Printing Solution

Strong toughness and impact resistance. Print Temperature Range & Diameter: 200-250°C. 1.75mm (tolerance ±0.03mm). No bubble or dust inside, lower clog or tangling rate. Sealed vacuum bag to keep it dry and keep out dust. N.W: 1kg, G.W: 1.35kg, spool inner diameter 57mm, spool outer diameter 200mm, height 64mm.

Reviews

Global ratings 3
  • 5
    2
  • 4
    0
  • 3
    1
  • 2
    0
  • 1
    0

Type of review

Revainrating 5 out of 5

Surprisingly easy to print

Goods arrived well packaged but the vacuum seal on the box was not very good. I don't know if you can see it, but one of the photos shows a view of the bag and thread. It's hard to get a good picture of how loose the bag was. Anyway, I warmed up the printer and started. I used Cura 4.7 to cut into the object and the nozzle temp was 230/70. I was surprised that he typed so well. I was hesitant due to the loss of the vacuum seal but had no problems. It's also fairly transparent. I was expecting a

Pros
  • 3D printing consumables
Cons
  • Cable is shorter than others

Revainrating 3 out of 5

Unstable quality. See updated review and photos.

**Updated Rating**: Upgraded to 3 stars because the gray spool I just received is terrible. I've been printing Petg Gray for a while now and the latest batch I've received is a much lighter shade of grey. There are also many problems with layer adhesion that lead to insane tension. By that I don't just mean tiny fibers, these are layer lines that don't stick and stretch over the print during the z-hop. I was in the middle of a big print and figured out the problem. I thought it might be the fan

Pros
  • 3D Printing Filament
Cons
  • Skimpy Instructions

Revainrating 5 out of 5

Works great once your printer has dialed

I'm new to 3D printing, but my Voxelab Aquila printed PLA well straight away, so I decided to try PETG for more structural elements. So I bought black and transparent from this manufacturer. When the slides arrived I loaded the roll and started printing test towers. It turned out that 235-240 °C was good, so I started printing Benchy. complete garbage. There are cords everywhere that separate from the bed. Return to the drawing board. I checked the temperature of my bed with a scanner: 65°C…

Pros
  • . Industrial & Scientific
Cons
  • A little torn