Feyachi Rapid Transition Picatinny Rail Mounted 45 Degree Front And Rear Backup Iron Sights Review

I bought these to try due to the cost compared to another set I purchased. These are of good quality and liked that they did not have white maker printing on them like the other set I bought. But these did not have the unthreaded part of the screw that hold them on as the other set I purchased as so they damaged my handguard, causing thread marks. I would not buy these again, and would spend the extra 8.00 on the other set.

Garbage. Clamp geometry within the assembly is terrible and the rail fit is sloppy. The single retention screw for the ratchet feature on the elevation knob comes loose and is poorly designed — there is no set screw. The windage knob is way too loose with no way to adjust the ratcheting friction. Worse, the axle around which the rear aperture is retained freely moves left to right by more than a millimeter, and the aperture housing is loose in the rotational axis, rendering the sight useless in

Good back up sights. I am left handed. I mounted them on the left side of a Benjamin BullDog. They work great. Product description states they are ambidextrous. In the question and answers, the seller states "not suitable for installation on the left side". On my BullDog, they work just fine. The only "flip up" part of the sights I have is flip changing the orifice size. They are pretty solid.

Who wants to "flip up" when a failure occurs? These are solid and accurate if zeroed properly. I have to worry more about what I'm throwing them ON than the sights themselves!

This product would work well for for airsoft or something like that. However, putting on a legitimate weapons system will not work. There is a TON of play in the rear site and the front post site will break at the first hard contact that is made. Will be returning and getting a much better product. At the end of the day, I got what I paid for. Unfortunately it will not suffice for my application.

Love the canted sights. It gives a different option to shooting. Down side, the sights came a bit scratched up. To sight in at 25 yards, the front sight post has to be almost fully moved up which in return makes it a bit loose. Overall not bad for the money I guess

Great quality! Have yet to use it at the range but overall I am very impressed for the price. Very easy to install and adjust. Only downside(s) are that the moving parts on the rear sight are looser than I would like, and it doesn't come with a tool to adjust the front sight. Otherwise great product and would highly recommend.

I am a beginner to 3 gun matches and needed a set of entry level 45 degree iron sights. I found these sights to be very accurate for hitting those up close targets that are too close for a magnified scope. Both windage and elevation adjustments are easily done with knobs on the rear sight, so no need for specialized sight adjustment tools

Great value. Solid metal sites. Sighted them in very quickly. Different from the picture in that the rear site is not calibrate like in the picture, it is smooth with no markings. I am not a competitive shooter, back country trained, so not a big deal to me. They are sturdy and locked in well. But I also use blue lock tite to ensure nothing backs out.

Mounted these on an AR 10. Went on with ease! Found these to be good and tight with little wiggle or slop. Good product. Just keep in mind that these are NOT flip up sights. They are fixed sights. Very similar to A2 style just offset. Great support from the seller, too!

They are good quality. All adjustments work well. They don’t fold down/pivot but I was ok with that on my rifle. Remember, they are back up sights.

It looks like someone molded these out of clay and cast them in pot metal. They have all the visual features of the "real deal" like notches indicating adjustment values, but everything is a muddy approximation of what should be clean and crisp markings. No report on durability or holding zero as I did not even spend the time to field these. They seemed sturdy enough, and for $25 they're getting one more star. Honestly, just buy nicer ones and buy once, cry once as they say. $25 could buy you…

My first complaint with these sights is that they are very large and surprisingly heavy for aluminum - there is a considerable amount of unnecessary and additional material, further machining could make this entire unit at least 30% smaller(and lighter). But, that issue alone would bring this product to 4 stars in my opinion, as that was my fault - after all, the product I received does match the pictures and a weight is listed.The real reason I gave this 2 stars is because there is a…

Excellent backup iron sights for an AR or other Picatinny rail gun. Perfect 45 degree offset, adjustable windage and elevation, and all metal material means you won’t have to worry about them breaking like the magpul plastic once that cost 10x as much.

They fit awesome. Just took some time to figure out my layout with the flip optic. Once I rolled the firearm, it felt very comfortable.

I purchased these sights and found the entire top of the rear sight wobbled and could not be tightened. Needless to say this would make sights very inaccurate. I returned them for a refund.

Exactly as described but better quality than I expected for the price. Save the big money for training and ammunition. Go with these sights and you wont go wrong.Of course, for my personal tastes, I've already taped them off and hit them with the High End Krylon FDE to match my M4A2 . Thank you for the incredibly fast shipping and product. Sincerely and Respectfully Yours, .Dr. Benjamin "Gunny Jack" Bennett Th.D

As far as being functional, they work fine! My issue is with the overall fit and finish! The set I received nothing looks like it was milled flush, and the workmanship is very sloppy! So it looks really cheap! The rear site is a little crooked, and does not seat square. It actually angled a little to the left (see photo). But you get what you pay for! Other than that everything still works, that's why at least a 2 star rating! The photo on the Walmart site looks way better than what I got! This

If you just want to try angled sights to get a feel for them, this is a budget friendly option. If you decide this is for you, spend the money on something lighter.