🧺 Frigidaire 134051000 Washer Belt - Efficient and Durable, in Black Review

The belt I received was apparently mislabelled. The part number on the belt is the one advertised (134051000) which is listed as fitting my washing machine and is also the part number on the original belt but it is about 2-3 inches shorter. I didn't immediately try to replace it and when I found the fault Revain's return window expired.

This belt with the same part number as the old belt is 4.5 inches shorter. compress the dampers and stretch the springs and put tremendous stress on a normally running engine Hmmmmmmmm what to do / I ordered stock as the bathtub is noisy, need a rainy day. MEASURE YOUR BELT!

It's very tight and I never found a good way, but in the end I managed to hold it while the big reel was spinning and now it works great. My washing machine would not spin at high speeds under very heavy loads. At first, lighter weights wouldn't rotate and eventually got wet. With a new belt everything is back to normal! Everything spins fast!

Strap too small. This belt was confirmed to fit my washing machine before I placed an order. I hired a technician to install new shock absorbers, bearings, rubber seals, tank seals and a new belt. The belt was so small that my technician was worried he would break something when trying to put the belt on the pulley and motor shaft. The original belt that came with the machine was made in the USA. The new belt says "Made in Brazil". I suspect a production error.

I ordered this belt before opening my broken washing machine as it was one of the possible sources of clapping noise. I could have saved some money by opening the back cover as the original strap was still in good condition. It was extremely difficult to install a new one, so after inspecting it, I reinstalled the old one. I keep it as a reserve. If you really need to replace the strap, you'll have to stretch it to tighten it. It seems a bit small for the Kenmore front loader it's rumored to be

Ok I was a little hesitant to order this after reading several reviews about the size and fit. However, my washing machine only chirped terribly during the mixing cycle, everything was fine during the spin cycle, so I bit the bullet and ordered. Another site charged $22 plus $8 shipping for the same item. Took me 10 minutes to change the belt. About 8 of these had to be removed and all screws and hardware fitted. I had already talked myself into buying a new $800 washing machine, but figured it

Belt was 2 inches too small and didn't fit. I searched the internet and found several appliance repair people that explained how to install the belt. They explained that the strap is designed to stretch enough to fit and stay taut. SOLUTION: Wear gloves. Here is how I installed the strap. I put the belt on the motor pulley and then with one hand passed the belt over the drum pulley and with the other hand turned the drum pulley. After about two-thirds of the way I was pretty sure the belt was…

The product arrived on time. The belt change was very easy. Actually, I went to YouTube to do some research. I knew if all I had to do was replace a broken belt it would be easy and cheap. But after I put the belt on and put the back cover back on. It was too good to be true. The washing machine went through a normal wash, but when it went to the final rinse. Then the washing machine started making loud noises because it was spinning very quickly. I knew that the two shock absorbers in the…