🚗 Dash Cam Hardwire Kit: Mini USB Hard Wire Kit Fuse for Dashcam - Plozoe 12V-24V to 5V Car Dash Camera Charger Power Cord (11.5ft) - Includes 4 Fuse Tap Cable and Installation Tool Review

If you don't want to use an auxiliary power supply/cigarette lighter for your power source and are comfortable enough to pierce your car's skin and fabric, this is a great way to upgrade the camera to be connected to the electrical power supply of the car. I have wired previous machines in the old fashioned and difficult way, it was a new and wonderful development of this task. Everything I needed was included, plus a few things I just had to choose the parts that suited my needs. That makes…

DVR hardwiring kit installed. Generally decent quality, however after installation the ground wire was pulled out of the U-connector (very poor quality of connector and ground wire. I stripped the wire and fitted a good quality U-shaped butt connector. Problem solved. The cable was very basic to relocate and thanks to the plastic hand tool. Now my car looks very clean. I was able to use the empty fuse slot in the cab. I would buy it again as it has multiple fuse options.

Be sure to watch the instructions on YouTube, you also need a multifunction tester. It's not just what people say. It took me half a day to install. And be very careful with the polarity in the fuse box. Use a multimeter to check which pin is in the fuse box and which is not. Be sure to screw the ground wire to your car chassis, otherwise the dash cam will not turn on the power. I like the end result, you just have to be patient and take your time to install it. My car is a 2016 Honda Odyssey…

I bought this kit for Akaso V1 DVR. My 2012 Ford Fusion cigarette lighter plug is always on so you have to get into the habit of unplugging the dashcam after use and this has become a problem. I chose this stiff wire kit because it has everything you need to make it happen. There are many videos on youtube how to hook it up and it was easy enough. I think the hardest part for me was accessing the fuse box as Ford made access difficult. I made sure the wires were routed and secured properly. I…

Installed this kit on my 2018 Ford F-150 to power a Rexing V2 dashcam and hooked it up to the fuse box which turns on when the ignition is turned on. It works great except when I put it in reverse. The DVR turns off and on intermittently. I've moved it to a different fuse slot and keep encountering the same problem turning on and off when reversing. My guess is that on the new F-150 the backup camera, reversing lights etc are causing slight voltage fluctuations in the circuit and triggering the

I bought this wire harness kit to use with DMYCO car rear view mirror, 12 inch IPS touch screen, 2560P dual lens front and rear. a constant power truck recommended by the manufacturer for use of the parking monitor function. Since installing this my truck's battery has been draining to the point where I have to jump out of the truck just to start it! I even bought a new battery last week and went to the truck tonight to find it completely dead! it will not drain your battery. THAT IS NOT…