🔫 HORUSDY Mini Pistol Grip Grease Gun: Compact and Powerful (2900 PSI) Review

well the instructions allow for a lot of imagination, i bought a gresse gun, the greese tube has a foil cap on one side and a plastic cap on the back, she pulls don't tell you which end to put in the grease gun, and they don't tell you if you need to remove the foil cover. I would suggest that you remove the plastic cap and remove the foil when inserting the hose into the oil. Pistol, but their instructions say to add oil, maybe there is a problem with the translation, who knows.

When O opened it, the entire plunger and associated parts were scattered around my garage. Spent two hours looking for her. After reassembly, a tube got stuck on the Zerc fitting and when I tried to remove the fitting it would not disengage from the coupler and the unit ended up pulling the Zerc fitting off the machine. I still can't separate them. Flexible tubing is almost impossible to install due to pump port design. Overall this is a piece of crap and I want to give it a -5 star rating. PS…

Remove all parts from packaging; bright. Installation of pipes and hoses on the gun; light. Pump lubricant into the first fitting; bright. It was VERY difficult to get the jaw sleeve out of the grease fitting. I had to completely unscrew the cam clutch attachment to loosen it. Spring set to minimum compression, still not working. Tried several times, each time I had to unscrew the nozzle. Keep in mind that you can damage the grease fittings, which I did. I ended up using an old nozzle from a…

I used it to lubricate 5 zerk points on a truck driveshaft. It worked fine. I did not use the lube that comes with the kit, instead using 3-ounce tubes of Autozone brand lithium grease. I was a little nervous because a few reviews mention a stuck zerk. But I didn't have that problem. I don't even know how he got stuck. There is a clamp that you loosen before you put the fitting on the mirror and then tighten the clamp. So while you're doing everything by hand, it's easy to unclip the ring when…

If you do this you will regret it. Picked up the device. No problem. Tries to lubricate the first Zerk. With great difficulty it was possible to mount the coupling on the mirror. Finally received. Easily lubricated. Then he tried to remove the coupling from the mirror. SERIOUS PROBLEM. He wouldn't move no matter what I did. I've tried every tool to achieve this. Canal locks, pliers and vise. Nothing worked. Because of the location, I couldn't get to the mirror to unscrew it. I ended up…

Poorly fitting cartridges and a butt trigger are not the best combination. My trusty cheap mini grease gun broke after years of service. This time I wanted a higher quality instrument. Instead, it took time to clean my bench, floors, garage closets, and one particular load of laundry after this monster kept releasing a spring-loaded plunger prematurely, shooting grease several feet at me, or pouring a whole tube of grease into my hands as I struggled to unscrew the lid. I lost about two tubes…

Some people get a product that works very well, others get a defective product that doesn't work at all, while other people like me get a product that only works for a short time. All the parts looked great in the box so I removed all the parts and installed a short straight pole and then a flex pole. On my tractor I missed all the spots and shortly thereafter the grip piston froze in the closed position (the grip was near the cartridge tube). After a bit of fiddling, I loosened the grip and…

Save your money at the end! My old grease gun was big and I had trouble getting it into tight spots on new cars so I decided to get one of the newer guns in a smaller size. Everything is going sideways here. 1) Grease couplers (both included) got stuck on lower arm connector A. When I removed the spring and teeth it fell out of a clutch on the first use. Easy enough to fix, but it shouldn't happen. 2) Piston did not push lube into hose. I had to remove the small hex bolt (behind the hinge) to…