🚰 Keurig B150/B155/K150/K155/K2500/K3000/B3000/B3000SE Water Filter Kit (Filter, Housing Head, Mounting Bracket + Screws) - Enhanced by PureWater Filters Review

Easy to install. Installed directly on the back of the coffee maker. Connection with simple connectors. Required to maintain Direct Connect Water Tank System warranty. Make sure you carefully read the instructions that came with the filter before you connect it, especially the part about flushing the filter BEFORE you connect it.

Great product I got for my commercial Keurig machine. Combine this with the B150 fittings you really need on a Keurig commercial coffee maker. One warning I would give is that you turn on the water with the plastic hose that is not attached to the Keurig. I forgot to do this and all the coal went into the Keurig. It is recommended that you wash off the black carbon dust before attaching it directly to the Keurig.

If you want to enjoy great tasting coffee from your brewing system, a carbon filter system is a must! The Omnipure filter kit was the "missing link" for smooth coffee aromas. Whenever you have a plumb line brew system, water can get stuck and stagnate in the line between brews. For this reason, most people who use systems with tanks to fill with water drain their tap water a bit before filling the tanks to get a fresher faucet performance (which is no longer possible with systems that plug into

Purchase with care. This kit is the same as the most expensive except for the key parts for a complete connection. As you can see in the first picture you will need a water shut off valve. To change the filter without shutting down the whole house, the 1/4" Shark ball valve will do the trick. Worth $8. Then the second picture shows the 1/4" garden hose adapter again. , not supplied by Keurig. And while I'm at it, which maroon designed the garden hose inlet? So could you plug it into the washing

First of all, you need to know that this 'Filter Set' only includes a filter and a bracket to attach to Keurig. It does not come with hoses or connectors. You can buy a kit that has everything here, or a trip to your local hardware store will get you everything else you need and probably for a lower price than the full kit here. The last option is what I did and followed another reviewer's great idea here to add a 3-way valve to flush the filter when replacing it. I have a fridge plumbing that…

I would scold the product for lack of instructions but it's pretty easy to find out. There is a bracket that attaches to the back of the Keurig and holds the filter cover (secured with the four screws provided). The lid has two threaded holes on each side, clearly marked "IN" and "OUT". The filter itself screws into the underside of the lid. Also included were 12' 1/4" NSF 58 hoses rated at 230psi, two threaded cap fittings, three quick connect L fittings, a Keurig tail adapter (although our…