🔌 LightingWill 10pcs Pack L Shape Solderless Snap Down Connector for 8mm Wide 3528 2835 Single Color Flex LED Strips - Perfect for Right Angle Corner or 90 Degree Connection Review

Can't get it to work with external LED strips. I've tried several times and they just won't connect. It seems like the clear plastic cover on the LED strip is too thick for the clamp to work. I am changing my rating to three stars. The company emailed me with an offer to refund my money. I finally figured out how to get the connectors working. You have to remove the clear plastic coating on the light strips, which is very difficult. Once the plastic cover is removed, the connectors snap into…

No problem with the 90 degree bend connections in your light strip. Small clip doors are quite difficult to open since they are so small, but that is down to territory as the piece is inherently tiny. Once open, simply slide the glowing ribbon under the small metal tabs and close the latch. Just pay attention to the polarity of the contacts on the bar. Whatever contact is on the outside of the bend on one side, it must be on the outside of the bend on the other side. If you get this wrong the…

Great price and even better customer service. I installed about 6 of these devices and one of them turned out to be faulty. I'm an engineer so I tried to troubleshoot, but it turned out that the ribbon cable was broken. So I contacted LightingWill directly because I didn't want to mess around with the whole return process (could be wasteful). They emailed me back the next business day with a tracking number. Excellent work! When installing these suction cups, don't forget to peel off the clear…

I was a bit hesitant to order these as some of the reviews suggested the products just didn't work or were unreliable. While I found the clasps a bit awkward (mainly because they're quite small) and the lack of instructions a very minor downside, it's pretty easy to figure out just by looking at the product photos on the store page. I inserted the glowing ribbon into the connector with the ribbon intact for easier insertion and applied a little more pressure to the pins. Once I have them in…

They work very well, have a nice low profile and are easy to use. You may run into a few problems which, I hasten to say, aren't the manufacturer's fault, but come with territory and have simple fixes: (1) Very wide LED strips may not fit into the grooves in the plastic. In this case you can simply cut the edges of the strips with scissors without loss of conductivity (ie without darkening). (2) As with any solderless connector, some voltage loss is inevitable when the metal connectors touch…