LINGDA Insulation Dampening Moistureproof Waterproof Review

The picture and product description say "role". The product obtained consisted of 6 sheets of product. The packaging even says 40x60. For those who need a roller to apply the product in one continuous piece with no seams, this is NOT SUITABLE. While this will work for a small portion of my project, it won't work for anything else that I intended to use the rest of the materials for. Therefore, it gets a low rating because the seller advertised it wrong.

Made a duct cover for the generator in the building, leading from the exhaust side of the generator motor fan to the shutters on the wall of the building. This resulted in the head blown off by the air-cooled engine going outside and not raising the building's internal temperature to a high level. Used this insulating mat to line the inside of the case. A little tricky to cut to size, it turned out the best way was to lay it out on a sheet of plywood after tracing the outline and then use a…

I used this insulation on the door panel of a double cab truck. The reason was to reduce road noise and add a layer of insulation to protect my black truck from the Texan heat. As a result, the interior of the truck has become significantly quieter to date. Much of the street noise is inaudible, but hasn't completely disappeared. It also made a difference in the heat, which is surprising since I can go to the store at noon and when I go out there is only heat in the truck, not a scorching…

I live in South Florida. and the summer heat will cook food in the cab of a truck. I removed all carpet, headliner and seats from my truck cab. I installed the thermal protection in about 15 minutes, has excellent adhesion. I reinstalled the carpeting, seats and cheap vinyl over the roof insulation. I turned on my truck and was immediately amazed by the minimal road noise and the musical acoustics, which were much better. The internal heat differential is the BEST feature. The cab of my truck…

I needed to re-insulate my outboard motor housing. I bought two packs of this stuff just in case. My approximate covered area was 16.6 square feet. Purchasing two packs of this material allowed me to cut it properly as the patterns were a bit crooked. I probably used more than I calculated so I suggest you buy two just to be on the safe side. At first I tried cutting with scissors, I didn't really like it so I gave up. Strongly recommend a new blade, be it a sharp knife, precision knife or…