🔍 Melling MFA350 Oil Filter Adapter: Enhancing Engine Performance with Efficient Filtration Review

Installed on a 1999 Chevy k2500 4x4 with a 5.7 Vortec engine. The oil filter adapter threaded perfectly into the block after I removed the oil cooler lines. The only problem I had was finding an oil filter short enough to clean the front driveshaft.

I used this to remove the oil cooler lines and factory filter adapter on a 1995 Chevy K3500 5.7 liter / 350 TBI. This works great, you simply remove the factory filter housing and bolt it on with 5/16" coarse thread bolts 1-1/4" long with no washers or gaskets. The next problem you will face is finding the right oil filter. In my case I had to use ac delco PF454 or Napa 7099. This is a shorter filter to clean the front driveshaft. Many people say the Fram PH30 will work, but it's a longer…

My 93 Chevy Silverado 5.7 found a large oil leak near the oil filter and engine oil cooler fittings. It looked like the old Spindletop oil well. I investigated the problem and found this article as a solution to the problem. I also ordered the recommended screws and the original AC/Delco Heavy Duty Gasket. I removed the old oil filter housing, installed an adapter and filter in its place, and secured it with the recommended screws. I started the engine with fresh oil and no more oil whips…

My 1990 Chevy Silverado VIN Z 350 CCI blew out a factory oil cooler gasket after replacing everything from the radiator to the coolant lines to the filter. Dorman replacement. Once I figured out the hex head screws, installation was a breeze. Order these screws to ensure trouble-free installation; Allstar ALL92001 Bolt Kit for Allstar ALL92000 Oil Filter Adapters - Pair. I was sure running the engine without oil had ruined it, but I was very lucky. I ended up with a WIX 51060 oil filter which…