Mixiflor 24Pack Abrasive Flap Wheel Sander: Efficient Cone Shape Sandpaper for Rust Removal, Weld Burr Removal, and Grinding Review

These are quality 1/4" shank grinders in a variety of sizes. Remember they come assembled in a cardboard box. I'd get some kind of cheap plastic case or something desired, since the box hardly holds together.

Abrasive starts to fall off before it touches the material. There was a pile of sand at the bottom of the box. Once placed in the tool it just throws material away from the rotation. As soon as they come into contact with the material to be sanded, they simply break off with very little pressure. A complete waste of money.

A set of flap wheels in different diameters and shapes. They are rated for 80 grit but can actually be a bit rougher. Because they are used on a drill press or similar device, they can be very aggressive at higher speeds. They are excellent for removing paint, rust or varnish, although care should be taken when using them on a wooden surface. All in all, this is a great tool to use properly.

I'm switching to sandblasting. But I still have finishing work that needs sanding. I'm in the process of restoring my fireplace. Sanding heads on Dremel tools work the same way as sanding sheets. But these are much bigger. I can still make grooves and corners this way, but unlike Dremel parts, they're larger and last longer, so I don't have to change bits every three minutes. It also helps if light is used to get into the corners of the wood pulp.

This set will last just because there are so many of them. My employed mechanic always uses flap discs first and not the traditional corundum grinding disc. He says they are unbeatable when it comes to welding preparation. He even has a flat disc (not offered here) on his angle grinder instead of the usual serrated disc. Although I've never seen a cone sander, I'm sure they have a use, especially in woodworking. Judging by their appearance (shipped in a flimsy crumpled up box inside an…

I'm going through these things I've used over the years to polish metal, remove paint in preparation for repainting and even clean rocket exhaust. army technology. This is a great set that gives you a variety of sizes of serrated lock washers and burrs. I used them with a dremel and a regular drill bit. For 80 grit I think a regular drill works better so the wheels don't snap too quickly. A circle can clean several inches of metal, but they wear out over time. The burrs work great with a…

When I need to sand a piece of wood or steel to clean and smooth the surface the flap sander is there is a good choice when the area is small. This is a good selection of fairly coarse 80 grit aluminum oxide grinders in 8 different sizes, 2 for each size of 3.2", 2.4", 2", 1.6", 1.2" , 1", 0.8" to 0.64" (that's 80mm to 16mm). ). They all come with 1/4" shanks about 1" long. Picture 1 shows the range which also includes 8 cone mills in 4 sizes which is a bit different. Photo 3 after. It does a…