Highly Efficient Monoprice Rapid Printer Resin: 250ml Additive Manufacturing Solution Review

Where to start? So! First off, it's a GORGEOUS color. I was looking for a real orange-orange like this and I found it! ... but! It's a huge pain in the butt to begin with. I've played with the lower shifts, shift time (up to 15 seconds with a 2 second break) - everything. I have a Photon S. Files that work well with other resins will not work with this one. Are you cutting this resin with the settings above? This is a 50/50 shot. Great support *NOT WORKING*. Period. 100% failure for any model…

Tried every possible setting and made sure the bottle was mixed very well before use. The tank was fresh and clean, but nothing. I had the most difficult time typing anything with it. and of the printed objects they were too soft and not very resinous. the best way to describe them would be crumbly. For example, imagine half-baked clay or something that's beginning to harden, as if it's done but not done yet. And of the part I printed, only one survived. I've thought about it for a bit and my…

This review is for Monoprice Rapid UV Black only. I've struggled with this resin for days trying to print several different models. I have tried many different exposure times, from low exposure times of 25 seconds to over a minute and other coat times from 5 to 9. The resin cures gently and does not stick to the build plate. Most models will eventually fall off the build plate and end up leaving a mass in the tank as shown in the photos. The only model that really caught on was the small demo…