Muzata 40Pack 3.3FT/1M LED Channel System With Milky White Cover Lens,Silver Aluminum Extrusion Profile Housing Track For Strip Tape Light With U Shape U1SW WW 1M, LU1 Review

These are a must have for LED strip light installs. Just make sure you get the right size for your LED strips and they make for a very clean install. The diffusion is great as well and gives a great finished look if the strips are exposed. The wall clips they come with have been working great for us as we installed the strips on the back wall of our church. These are aluminum so they are easy to cut to size with standard woodworking blades or a hacksaw.

Ok, so got this to hide my tape lights in my kitchen.*They do knock down the brightness a little, but good diffusion*If you are mounting on an area that will cause some reflections, you will see the "hot spots" like in my second picture.*The amount of hangers they include isn't enough. I had to get creative with a few that were under-cabinets because after I cut them into smaller sections, I started to run out of hangers.*I used a metal blade in my jigsaw to cut the channels with ease.used…

I bought those to install pointing down. I am a hobby machinist, and I am quite handy with projects of all sizes. Found out that it is almost impossible to snap the diffuser onto the aluminum channel. Finally had to dismount all the system, install close the difusers using pliers, which caused dents in both the channels and the difusers, and scramble the assembly up. Even with the pliers, closing was truly hard. Then, since you cannot install screws when the covers are closed i had to use the…

The LED channels really make my LED tape strips look very professional. It gives a clean finished look and the diffuser effect is pleasing to the eye.I put the strips behind my TV for bias lighting, and the aluminum rails are much easier to attach double sided foam tape on a couple points, instead of the crappy LED strip tape adhesive which doesn't want to stay straight. Installation is a breeze.I ordered my item directly from Muzata but my order was missing the clips and end caps. I reached…

Up until today, i was super happy with these. I've ordered these from this company before but after installing all the channels into place, i noticed the covers were too short(a problem absent on previous orders. The end result is a cover that falls 1/16 of an inch short of looking like a professional install. Bar opens in 2 days. Bottle tiers now look terrible. Not happy.

I used these for the segments of a very large digital clock build. They are easily cut for whatever your needs. The plastic bezel has some diffusion on it - not sure the level however. You can still see the LED under it with some diffusion. I would use a piece of paper under the plastic - maybe folded over and pressed into the channel if you wish more diffusion on the bezel.The plastic slides easily into the channel, however, I'm not sure how long of a run you can push it into. I used 3-6 inch…

Onforu 33ft dimmable LED strip (3000K warm white) above a 25 ft vertical blind for indirect lighting. I installed the light strip into these Muzata aluminum LED channels. I didn’t want to use screws, so I used the Muzata extension connectors with gel superglue, clamped to the channels for 30 minutes. A great trick is to cut the first diffuser cover strip in half, then use full lengths from there on, so they overlap the channel seams and add stability. Bend the diffuser covers up and roll them…

I'm going to split the difference here because I'm not sure how much of my issue with these was my ignorance and how much is the actual product. While I'm not unsatisfied with the product at the end of the day its not what I really wanted the project to look like. I believed that these would disperse the LED lights and create an "LED NEON TUBE" like effect. What I ended up with was LED "dots" under a plastic cover. I tried several ways to achieve the desired effect but no dice…

I bought these to put LEDs under my deck railing. They are very solid and will not bend easily. It does take some effort to get the diffusers into the channels, as they are a very snug fit, but I consider that to be a good thing. The diffusers do a great job of evening out the high density LEDs I've put in the channels. The clips do their job holding up the channels, and they do this with minimal sag when upside down as I have them.

We use our LIFX strip lights above our cabinets in the kitchen and laundry. I first laid them down on the cabinets, not wanting to stick them and have to move them later. They didn't lay flat and rolled up at the ends.With the aluminum channel and the cover I just put the lights in the channel and use the cover over the lights. I still didn't use the sticky tape on the LED"s.I have a couple of 6' long LED strips, so I just butted them together and laid them down. Not perfect but it works for…

I've ordered this "Muzata 20-pack 3.3ft U shape LED aluminium channel system with cover, end caps and mounting clips last year on March 14, 2018, but I didn't checked if the set was complete. Now a year later March 2019 I've installed it on a staircase and noticed that it only came with 10 PC covers instead of 20 PC covers. Now I need to install the rest under kitchen cabinets and I miss the 10 PC covers. So now I've just ordered another Muzata12- pack to complete the job. This was certainly…

These are a MUST HAVE if you're installing LED strip lights and want a professional appearance.I had installed some LED strip lights under my cabinets. The adhesive strip they had was useless and within a day or two they had all fallen off.So I bought these channels and fastened them to the underside of the cabinets. They were easy to cut to size on my power miter saw and they fasten to the cabinets with the included brackets.They give a very professional appearance to my lighting and now there

These work great for diffusing white for LED strips. On top of that they are easy to mount and I like the install clips because you can take the light strips on and off with easy. One thing I will say they’ll probably great for normal RGB strips but when using Phillip hue led strips they have a giant plastic cover around the strip so it fits tight in the aluminum strip and when you try to apply the lens cover it doesn’t clip in the place/hold. The remedy was scotch tape just wrapping tape…

I ordered this product to install LED strip lighting on my boat. This product worked as planned and looks great. All mounting hardware needed was supplied as indicated. The quality of the aluminum channel and plastic lens seems good. Everything was straight and snapped together precisely. I would order this again. Recommended.

Purchased for under cabinet lighting. The channels work well and are easy to cut and install. Be aware that most 4 wire connectors will not fit into the channel. You will need to solder any wire connectors or splices.

Really nice for led lights. I just drilled holes in it and used screws to attach. If you need a corner connector I'd look at a wider channel though. Will buy again if I need more on my next project. Good deal for the price.

We like the way this turned out after much effort trying to hang. Be prepared to be frustrated with the junk parts these come with. Another run to lowes and drilling threw each one will be needed.