🚪 OMIX 17237.21 Door Jam Switch for Jeep Wrangler, Cherokee & Grand Cherokee (91-07 Models) - Enhanced SEO Review

When the spring and plunger come out, it's not over. I did this a few times during installation and was able to fix it and install both sides. In this case, all you have to do is put the spring and plunger back in, push them all the way in, grab a small flathead screwdriver, and flip the switch. Keeping the plunger fully depressed, take a screwdriver and firmly press the metal pins. Let go and see if it holds. Then install it in the cork before installing it in the door. Be sure to close the…

I broke 3 of these because I didn't understand how to install them. Adjust the length before inserting the door jamb. Look at your old one to see how long. Use only your hands to push the plunger to the desired depth, then SLOWLY close the door for the first time. I had trouble installing it on my 2004 JT. I took a small 3/4" x 3/4" block of wood, drilled a hole for the piston and hammered it in with a rubber mallet. Then he entered easily. A month has passed since the installation. I recommend

the thing fits my 05 TJ perfectly. A lot of reviews say it broke, but once you understand how to install it you'll understand why. If you replace the part and close the door normally, it will break. You have to go through a process to adjust the length of the piece to fit your door and for that you have to close the door very slowly and when you close you hear a series of pops and it's a plastic cylinder that slides a shorter length. Continue this process slowly until the door is completely…