🔧 PneumaticPlus Miniature Pressure Regulator PPR2 N02BG 2 – Improved SEO-friendly Product Title Review

I bought this to use with my gauge calibration kit to calibrate gauges in a brewery. My old controller drifted too much, making it very difficult to calibrate the meter. This one works pretty well and is stable once you get the pressure you want. The ports are the right size and position for my use. It's a gauge pressure gauge, so if I go over the desired pressure, all I have to do is back off a bit. In the photo, the digital calibration gauge is on the right, the gauge is calibrated on the…

I use it after on-board air to inflate tires to a selected pressure without having to hold the inflation trigger in all the time or risking over-inflating if I connect a hose directly between the compressor and the tire. I installed a coupler with a socket, to install it I plug in an inflator (with a pressure gauge) and dial in the correct pressure, then remove the inflator and replace it with a tee, two hoses and two retainers .-5265 cartridges for two tires. This allows me to inflate two…

Bought to improve the air handling of my airbrushes. Sometimes I have to use very low air pressure. My compressor regulator could not be consistently adjusted below 10psi. I bought the 3 to 30 psi version and placed it downstream of the air compressor regulator. I positioned it to be handy while painting. It works great at ultra low pressure with my 0.2mm airbrush. If you're buying it for this purpose, be aware that you may have trouble finding the right adapter. I had to adapt the 1/4" female…