🚙 ReadyLift 2.5-Inch Lift Kit with Smart Suspension Technology - Xterra/Equator Review

Purchased and installed on some edges, high quality materials are easy to install and work well with your stock to improve your alignment. I would also take some spc UCA and eccentric bolts Really to sweeten, otherwise a great little mini lift on its own budget.

Everything you need is included except camber adjustment. Together it's easy. I installed the leveling cam screws before reconnecting them to the rack which made it easier because the screws were tight. My alignment shop stated that to get alignment close to spec, they need to fully adjust the cam bolts.

Works as expected. Installed on Frontier Pro4x 2017. The tail was a little lower, maybe 5/8" so I also added a 1" lift block. I went back to a little rake but much better than before. I got the extra lift I wanted and I think my truck looks great. The new front and rear wheel arch to floor measurements are 37-1/8" front and 37-5/8" rear.

Overview is for fitting as I have not driven a truck before, all parts are fine, it was fitted fairly straight but I had to put in new floors Levers on either side clamping the camshafts had to be cut out with a saw. My only concern so far is that the truck isn't level, it's 1 inch lower in the back than the front, which isn't a big deal, but it's not level. 2016 crew of the St.

I bought this for my 2012 Nissan Frontier with a sporty look. Looks great, everything I was hoping for. I picked it up and drove it through the mountains right after I put it on and didn't hear any touches, so the bumpers do the trick. If you want to improve the position of your truck and keep everything else in stock, this lift is for you. My first two photos are before the photo, the rest is after. This set only took me 2 1/2 hours to put on.

This kit is exactly as described. Installed it in my driveway in a few hours, wrestled with a few stuck screws but nothing the old kick couldn't handle. The car is perfect now. Looks great, drives like it came from the factory. Thanks to the rubber buffers, I didn't notice any contact with the reel bucket. I know you can select different parts on eBay or elsewhere and save yourself a few bucks, but save yourself the hassle and buy that particular car, all in one package. I would buy again in a…

Purchased for 2019 Nissan Frontier. The kit is absolutely not worth the money, the upper arm has "hackers" unless DELIVERED FROM UPPER LEVER OFFICE CONTACT WITH THE BLADE. This kit causes so much contact with the roller bucket that repeated impacts caused my upper arm ball joint to break. Do not buy. A much better option is to use OME 2607 mid-load lift coils and swap out the springs, which reduces sag and increases ground clearance, giving you 2.5x lift. I did this. And it doesn't cause…

This kit has just been installed. Total time was 6 hours for everything. I definitely could have cut it a few hours, but I wanted to take my time and make sure everything was done right. The truck fits perfectly! As stated in the kit, 2.5" front and 1.5" rear. The Ready Lift website says it's not for the Pro-4X, the front end can sit higher. Perfect! Fully visible and my small border looks more solid! A few installation tips: 1: Replace the camshaft bolts with the brace removed. So much easier!

It took me longer to install this kit than others who have written reviews, but I have to say I'm far from a mechanic. It took me about 6 hours to make the front and 2 hours to make the back. The rear was very basic, just a few things to watch out for. Making sure the axle is clear of the brake lines, lower the spare tire far enough to remove and replace the new bolts. You may also have a bit of a struggle on the passenger side bottom bolt as the exhaust pipe gets in the way a bit. The front…