Header banner
Revain logoHome Page
πŸ”§ manatee argon regulator dual co2 flowmeter for tig mig welder gas and backpurge - 60 sfch with cga 580 inlet connection and 5/8" x 18rh outlet fitting - accurate gas metering delivery system logo

πŸ”§ Manatee Argon Regulator Dual Co2 Flowmeter for TIG MIG Welder Gas and Backpurge - 60 SFCH with CGA 580 Inlet Connection and 5/8" x 18RH Outlet Fitting - Accurate Gas Metering Delivery System Review

7

Β·

Terrible

Revainrating 1.5 out of 5Β Β 
RatingΒ 
1.7
πŸ”¨ Welding Tools, πŸ”§ Automotive Tools & Equipment

View on AmazonView on Π―M

Media

(4)
img 1 attached to πŸ”§ Manatee Argon Regulator Dual Co2 Flowmeter for TIG MIG Welder Gas and Backpurge - 60 SFCH with CGA 580 Inlet Connection and 5/8" x 18RH Outlet Fitting - Accurate Gas Metering Delivery System
img 2 attached to πŸ”§ Manatee Argon Regulator Dual Co2 Flowmeter for TIG MIG Welder Gas and Backpurge - 60 SFCH with CGA 580 Inlet Connection and 5/8" x 18RH Outlet Fitting - Accurate Gas Metering Delivery System
img 3 attached to πŸ”§ Manatee Argon Regulator Dual Co2 Flowmeter for TIG MIG Welder Gas and Backpurge - 60 SFCH with CGA 580 Inlet Connection and 5/8" x 18RH Outlet Fitting - Accurate Gas Metering Delivery System
img 4 attached to πŸ”§ Manatee Argon Regulator Dual Co2 Flowmeter for TIG MIG Welder Gas and Backpurge - 60 SFCH with CGA 580 Inlet Connection and 5/8" x 18RH Outlet Fitting - Accurate Gas Metering Delivery System

Description of πŸ”§ Manatee Argon Regulator Dual Co2 Flowmeter for TIG MIG Welder Gas and Backpurge - 60 SFCH with CGA 580 Inlet Connection and 5/8" x 18RH Outlet Fitting - Accurate Gas Metering Delivery System

βœ” WHETHER YOU ARE a welding beginner or a seasoned professional, you will surely enjoy using the Argon Regulator Dual Flowmeter! Perfect for hooking up the same tank to multiple machines or if you want to back purge and don’t have a second tank to do so. βœ” COMPATIBLE with a range of gases, including CO2 as well as argon, and designed to reduce and control pressure levels, this MIG TIG Welding Argon Regulator really is a must-have for any welder. For convenience, the regulator is equipped with a high pressure weld gauge that allows you to view how much gas is left in the tank, while the ergonomic flow meter can be adjusted for different uses. Applicable for many kinds of gases, such as CO2, argon, helium, nitrogen and argon co2 mixed tanks. βœ” DESIGNED and PERFECT for MIG and TIG Welding Applications. Our Flowmeter is an economic alternative for the demanding customers who wants more precise gas metering. Offering convenience for maintenance and fabrication industries. βœ” HAS CGA - 580 Tank fitting so it will screw right into the Argon, Argon/CO2, and Helium Tanks. The Square flow tube reads from 0 - 60 CFH and has large 1 1/2" diameter pressure gauge which reads from 0 - 4500 PSI, so you know how much is left in your tank. βœ” Welders around the nation agree that the Argon Flow Meter Regulator is key to accurate gas meter readings.

Reviews

Global ratings 7
  • 5
    0
  • 4
    1
  • 3
    0
  • 2
    2
  • 1
    4

Type of review

Revainrating 1 out of 5

This product requires a lot of work.

poor quality of components, poor workmanship. I have seen better quality Happy Eating toys. Sent back due to leakage. I rarely leave reviews, but this product needs improvement. Great concept but poor execution.

Pros
  • beautiful thing
Cons
  • no performance

Revainrating 1 out of 5

Leaks, terrible handling.

Probably the worst workmanship I've ever seen on a product. The threads were miscut, the gas hose burrs weren't even screwed properly into the regulator body. The flow meters sloped inward, honestly I'm surprised they didn't fail catastrophically. Returned.

Pros
  • Best
Cons
  • Almost OK

Revainrating 1 out of 5

DO NOT BUY THIS best gas welder

Popped up, stuck on the bottle, leaking everywhere, now I have to try to fix it so I can do the job ordered, I thought I won't be using it much , so I didn't buy the expensive branded product, but useless right out of the box - not what I expected for $60, complete rubbish. DO NOT BUY

Pros
  • Several competitors
Cons
  • Minor problems

Revainrating 2 out of 5

Doesn't work at all. for gas regulator

The regulator arrived defective in the box. The argon didn't get through at all, even though the gauge was fixed, and it was sent in product packaging that wasn't even taped over and had no packaging to keep it from bouncing off. Literally just an unnecessary item that was taken off the shelf and labeled on it.

Pros
  • Ideal for outdoor activities
Cons
  • No instructions

Revainrating 1 out of 5

Does not hold solids outlet pressure

Bought for backwash on stainless steel pipes, will not spend money on it anymore. Have to keep reconfiguring my stream, can't support 2 outputs with constant cfh. Randomly decides to add or remove gas. Bought this specifically to test welds on 316 1 x 1/4 stainless steel tubing. Failed because he decided to increase my flush flow and flush my bevel. Extremely disappointed with this product.

Pros
  • βœ” COMPATIBLE with a range of gases including CO2 and Argon and designed to reduce and control pressure levels, this MIG TIG Argon Regulator is truly a must have for any welder. . For convenience, the regulator features a welded-on high-pressure gauge that lets you see how much gas is left in the cylinder, while the ergonomic flow meter can be adjusted for different purposes. Suitable for many types of gases such as CO2, argon, helium, nitrogen and mixing tanks with argon and CO2.
Cons
  • crumpled

Revainrating 4 out of 5

Custom 1/4 " hose fittings require adapters to connect to 3/8 machine port

Outlet uses a 1/4" notch, which is most likely metric. The outlet fitting is a two piece system that will not fit a traditional hose fitting adapter. So you will need a small diameter plug and use a double barbed adapter to change the size of the hose if you can't swap out the hose adapter to fit your machine.The regulator has a fixed pressure and only a gauge for the tank pressure.Once I connected the leak free hose, was the controller functional and easy to use I plan to use the second port…

Pros
  • βœ” DESIGNED AND IDEAL FOR MIG AND TIG WELDING. Our flow meter is an economical alternative for discerning customers who require more accurate gas measurement. Provides convenience for the maintenance and manufacturing industries.
Cons
  • Some bugs

Revainrating 2 out of 5

Heavy duty but no quality control in assembly.

I bought this regulator for TIG welding stainless steel with backwash. It came quickly but unfortunately it has to be sent back just as quickly as it wasn't assembled properly. Yes, it's durable and appears to be well made throughout. However, something is definitely wrong here. If you look at my attached photos you will see that while mostly well made all the parts are grossly misaligned. In the last photo you can see the adjustment knob shown from one side; When turned, it wobbles back and…

Pros
  • βœ” Whether you're new to welding or a seasoned pro, you'll love using the Dual Argon Regulator! Ideal for connecting the same tank to multiple machines or when you want to backwash but don't have a second tank for it.
Cons
  • Not sure