🚗 Front Left Driver Side Power Window Regulator Motor | Nissan Pathfinder Frontier Xterra Suzuki Equator (2-Pins Plug) Review

Works as good as any. The only problem was that one of the screw holes had to be aligned by bending it a bit. Nothing serious.

Perfect for my 07 xterra. It was very easy to set up, although an extra pair of hands helps. Fits great and costs less than half what my local auto parts store would charge.

This should have worked for a 2007 frontier. This is not the case, the support mounts are the wrong width and the mount itself is not interchangeable with the old mount, so I see absolutely no way to get this to work.

after watching the youtube video the installation was very easy. It didn't take more than 30 minutes. It didn't fit exactly, but with the help of a pair of pliers, I folded back a few tabs and got it working. It works as it should and at a much lower price than OEM.

Better than one. Easy installation with YouTube video for instructions. You will need a pry, a socket and a 10mm wrench, a decent flashlight, a Phillips screwdriver, strong tape and a razor blade. It took about 45 minutes because my window was stuck in the 95% open position.

Wrote the wrong review on another lol but it's not for Auto Driver Side Window 2005 Nissan Pathfinder le I had to remove the motor from the old one and put this one in One in to make it work, thank goodness the engine was fine! Just be sure not to take it if your old window motor doesn't work!

I recommend watching some YouTube videos during installation. This kit is a perfect match for our 2015 Nissan Xterra. Installation was a little tricky, but with the help of online tutorials I was able to fix my driver's side window and save hundreds of dollars. You need this entire kit. Some of the other listings only have the motor, I don't see a way to just swap out the motor. It was MUCH easier to install. Highly recommended, my window works like new again!

Works great after a little improvisation. As for the engine bolts, they don't align properly on the 2007 Nissan Frontier SE chassis. I had to bend the metal clips on the motor mount to align 2 of the 3 screw holes, unfortunately I couldn't align the 3rd because it was too short. The adjustment screws were perfect and had no problems. In any case, I highly recommend any car owner to do it yourself, not only is it a great experience but it can also cost the owner at least $600 if someone hires a…

Engine bolt holes don't quite match 2007 Nissan Xterra. But I was able to bend the part a bit so the screw holes match up just enough to be able to install it. This isn't the part that should be in exactly one place. You just have to fasten it firmly, which I was able to do. Otherwise it works fine and maybe a little worse than the OEM part. The meaning of the metal seemed a little thinner. The holes in the regulator line up perfectly. The price was right and the work wasn't difficult. I saved…