📊 Enhanced SAM-PRO Dual Moisture Meter 2.0: Advanced LCD Color Display & Flashlight - Accurate Moisture & Temperature Readings in Wood, Concrete, Drywall, Carpet, & Building Materials Review

First, the device does what it's supposed to do. Make sure the device has acclimated to your test environment for the recommended 30 minutes before testing. The instructions are very brief and if you have never used a moisture meter before you can watch some YouTube videos or read some expert instructions for a more complete description of how to use it. [Better education leads to more accurate results.] Final question: There are four (4) modes. The device defaults to Mode 1 when first turned…

The moisture meter arrived on time and was able to use it immediately. We had a water leak in the ceiling above the wall to wall carpet with a sponge and absorbent pad underneath. The carpet was soaked, but we didn't know if moisture had penetrated the "waterproof" coating on top of the padding under the carpet. The gauge could be punctured through the surface of the upholstery to see if it was wet underneath. It was dry. Using a moisture meter informed us of the hidden condition, allowing us…

My daughter and her whole family were constantly ill and we kept them housebound. They did a mold test and it was positive, mold was growing on it. We needed to know where the moisture was in the house and where the mold was growing. Which work. I thought maybe there is a product on the market that looks like a thorn picker but can tell us where the moisture or mold is. I went to Revain and found this amazing product. I bought it straight away and on Saturday we dug it up and used it around the

Last December the floor shifted causing a pipe in the concrete of our home to change angle, reverse flow and flow under our laminate floors. Fortunately, our insurance paid for most of the $20,000+ repairs. Shortly after I was washing dishes in the sink and after feeling water on my socks I found that the U-notch PVC pipe under the sink was not attached. I immediately placed a dozen towels on any wet spots and fanned them while reconnecting the pipe. Panic set in and I quickly ordered this…

Received this today and started using it straight away. Yesterday I bought a bunch of air dried ash wood that I plan to use for a project soon. So I couldn't wait to tear open the packaging and try it out. I put in the included 9v battery, removed the cover and adjusted the settings, then tested my wood. It was so easy to use and I love the additional scan readings/max/min settings. The last pages of the manual tell you which mode to use depending on the type of material you are testing. I know

Reception desk. Periodically, when wood is known to be wet, the reading will flash briefly and then freeze at 0.0%. It works on my arm and then stops the high reading as Max can't erase it no matter what you do. , never locks/holds Min? Experimented with multiple materials, can flash the instant reading then return to 0.0%. The instructions are not clear on how the Max/Min function actually works and how the readings are cleared from memory. Question sent to Sam-Pro, no answer yet. I think I…