Signal amplifier Tenda nova MW6-3 AC1200 Home Mesh WiFi system with 2 Gigabit ports. By Review

1) Although the setup is simple, problems are possible. Provider Dom. Ru, static IP address. Since there is no way to register all the settings (fine) on the web, and the settings in the application are very limited, I had to call and deal with the provider's support. The issue was resolved relatively quickly - less than a day. (the problem was on the part of the provider, they did not see the trend). 2) It must be taken into account that in real conditions the signal will give much less power…

When placing an order, when choosing a delivery from a pickup point, please clearly indicate the location of the pickup point and a description of where the specific pickup point is located so that it is easy to find the required pickup point.

everywhere you need, there is now Wi-Fi. Pleased with high connection speeds, the Internet flies. A lot of smart home gadgets, so everyone connected without questions. Some pros: 5GHz and 2.4GHz work great at the same time. I created a guest network - I installed a TV and a Sony Playstation there. The app has a nice simple design and is easy to work with. Support for smart home technology. With its cons: smart home from Amazon - Alexa only in English. I can do it, but it would be better if it…

I think that this router is justified to use for building a mesh system with a decent reserve for the future, when expanding the "smart home" system, as well as for aesthetic reasons.

All attention! Turn it on through the WAN - slot to the main wired (or wireless, preferably with Wi Fi disabled) router. Turn on DHCP there, and turn on Bridge in Tenda, and then the Internet from each point is distributed independently at full speed (300 Mbps is fixed in speedtest. Net, "like a hose"), while you can also plug a TV set through the LAN. Any other ways to turn on access points are fraught with the fact that the points are forced to switch to Wi Fi bridge mode between themselves,

Getting ready to move into a new apartment and need to cover 80+ squares. I ordered 2 modules, I've been testing for three months now - everything is fine. Personally, one thing upsets me so far - I connect them to a managed router, and that’s the trouble with them) But I ordered a Mikrotik, I think the troubles will go away. Excellent, and most importantly INEXPENSIVE mesh system. I took it on Ali for 7tyr for 2 modules. They also have models cheaper (simpler), but outwardly they liked these…

I wanted to replace the beeline provider instead of the router, but I didn’t quite figure out how to set it up without the previous router.

covered both the basement and the veranda. The speed is at the same level everywhere - without drops and blind spots. Now I can even work from the roof, the main thing is that the gadgets do not sit down quickly. Three blocks of 500 sq. meters covers. Has pros: - seamless roaming between blocks; - the signal is good; - gigabit ports; - blocks connect automatically, very fast setup; the network automatically adjusts to the best transmission from the number of blocks in the Mesh. Has cons: The…

The previous generation regularly covers a country house and a couple of neighboring plots with a large number of users with a network. Before moving to a large apartment, I decided that I also need to take it. It turned out that one cube perfectly covers 95 squares, the rest hung more to distribute the load. But I had to connect with a tambourine: Primary detection occurred from 6 times, after sorting through several options for a twisted pair. Then network connection "catches" requires a…

Great system. There were problems connecting an additional module using an Ethernet cable. The module was not connected to the base module. While the module connected wirelessly without any problems. Resolved by resetting the module to default settings and reconnecting. The module is connected and so far there are no problems. It should be noted the large radius of action of the modules. Of all the routers that I have had, the tend has the largest radius. With a tariff plan of 300 mb / s, the…

Can anyone suggest what is wrong? The main node is connected to the router with a wire. In the application, the driven cubes are green, they say the connection is ok. But seamless roaming does not work on either android or ios, it just breaks the connection when moving away from the cube. The network is in an ordinary Stalinist kopeck piece, 56 kv, only 3 cubes. In the application, there is a checkmark, the cubes are in bridge mode. Generally a strange story. For set-top boxes, the rest of the…

The system is really cool, worth the money and beats back in terms of similar devices (without MESH) from other manufacturers in the 5Hz category and Wi-Fi standard 8022022ac. I have a bunch of Mikrotik + MW6 in the bridge. 4 rooms (vest, 100 squares), thick load-bearing walls, a cable from the central router (mikrotik) is connected to the bedroom and the hall. In the center of the apartment there is an impromptu study with a second mikrotik in switch mode (there is a cable to the bedroom from…

It was necessary to make the most stable wireless (the wires somehow got tired) connection at home (three-ruble note), there used to be a zoo from a router and two repeaters. All this worked badly and not stably, and it is not clear what exactly did not work, either a repeater or a router. In short, it was terribly annoying. And then I read about miracles from google (mesh) and thought where to get such a thing. I rummaged through all the forums and read a bunch of articles and realized that…

It’s very convenient, I set it up once (in the store :-)), and then just plug it into 220 at any point in the house and that’s it! She finds everything herself and builds it in the right scheme. The funny thing is that if you moved to a new habitat, you just took these cubes with you, stuck them in a new house / apartment / cottage again and voila, here's the Internet for you in any corner of a big house, without dancing and dancing with a tambourine. By the way, the seller said that you can…

All points are in direct line of sight of each other. House 2 floors brick, with reinforced concrete floors. Karoch, I did not receive any "seamless" Internet without speed loss. There are 3 Zyxels and, apparently, I will make a network on them. Before that they are 2 years old! worked without any dances with tambourines. Set and forget - it's about them! It is possible that everything is much better with other meshes - this is the first and, like, the cheapest one. Already regretted buying…

In general, everything is quite good. Has some pros: Actually, about the merits have already been painted before me. I can only add that two Beeline TV set-top boxes work without interfering with each other in different rooms. Lags are not noticeable. Tested on two different HD channels. Has some cons: Raw software. Well, it's really raw. Non-obvious ate procedure. I ated two of the three cubes - now I can’t ate the third one in any way - at the stage of loading the firmware, the waiting wheel…

Surprised by the system. Out of the box it is configured to connect the blocks to each other. Added an additional unit recently (connection was mediocre in the garage). It was automatically added, the network was rebuilt - Internet access via Wi-Fi is now excellent everywhere. Some pros: Using Wave 2.0 MU-MIMO and Beamforming+. Each connected client receives a powerful signal with maximum Internet access speed. 2.4 and 5 gigahertz in the same network. Gigabit LAN port for wired connection. With

There were the same houses, the experience of use was great, I bought such de for the dacha and dances with a tambourine began. Cubes flatly refused to work with apple products, constant disconnects and assigning a new ip address. There are no settings for assigning a specific ip to a device, there is no binding to a specific Cube. The application itself looks as minimalistic as possible and there are no options as such. There is no choice for each device either 5Hz or 2Hz. It works perfectly…

I took it during the beginning of quarantine, so to speak - I managed it, but . 1) I took it for seamless Internet; 2) took to a country house for an extensive radius. So: 1) The name of the network is the same throughout the house, but if you speak via messenger, then when you switch from one cube to another, the connection hangs for a second or two and then connects again, BUT if you are already using voLTE, then the call will end, otherwise In other words, there is NO seamlessness, unless…

I bought a set of 3 cubes. All connected by wire to the local network. Configured to work in bridge mode. The settings are so simple that it took 15 minutes. BUT - the Huawei P30Pro phone clings to one cube at a frequency of 2.4 GHz, and to others at 5. The logic is completely incomprehensible. One laptop stands right next to the cube, but at the same time it clings to another, which is located through a thick concrete wall 15 meters away. Accordingly, the speed is below the "plinth" - 10-15Mb…