🌡️ Accurate Temperature Monitoring: Taylor 3506 TruTemp Dual-Scale Analog Thermometer for Oven/Grill Review

New oven so I bought two thermometers to check the temp - and I'm glad I did. It was 50 degrees below the set oven temp (below the set temp). Rubbermaid adjusted the set temperature, so I'll pick two of the three. I don't see a setting for it, so I can't use it. 50 degrees is nonsense - it means everything burned down.

Bought a few to keep in my two ovens and grill. Decided they would help. Well, the readings in the same oven varied by more than 50 degrees, and the lowest readings were 100 degrees lower than my GE monogrammed oven. Also, they don't match the picture. I'm waiting for a digital thermometer to see if/how much my oven temp is really off.

I wasn't sure if my oven was getting the temperature I wanted so I bought this oven thermometer. I noticed a temperature deviation in my oven which helped a lot. I had some trouble reading the thermometer as the oven was hot and opening the oven for an accurate reading blew out the heat. I'll find a better spot in the oven so I can get a better reading of the temperature.

I bought this oven after overhauling my oven to see if it was working properly and if there were temperature fluctuations. I can bake pizza before it reaches full temperature. If it is baked or fried for a long time, it will finally show the correct temperature. It's a little hard to read except at 350F, which is straight up. There are no temperature changes when the oven is switched on and off. He seems too slow to react to this.

The temperature control on my oven is switched off. I know this because things were not cooked after the suggested time. the cake was sticky inside. the cheese is not browned. The pizza is not crispy. The solution was to control the interior. how hot it was hot. This thermometer was the solution. Hanging the thermometer on the top shelf, turning on the oven at 350° for 30 minutes showed that the temperature had dropped 75°. Turning my knowledge 425°, I found the temperature I expected. Now I…

Worthy of the job. BUT. It almost looked burnt after a single use to verify that my oven was actually 500*. Since it doesn't (it's been below) and claims to go up to 600*, I'm not sure if it just looks baked or browned, or if it's an ephemeral product or something. Everything is OK. Not a lot of money for it and it really did the job. So in general I think everything is fine. Nothing special or highly recommended, but decent I think.

Pretty weak. Every time I put something in or take something out, I get knocked around the stove. I don't know how accurate it is because you need an accurate thermometer to check! Yes! It definitely doesn't match the dial of what I think the temperature should be, but it's a fancy Italian series that doesn't fucking work. Difficult to read when the oven door is closed as the markings are faint. It's not very good when he's on his back, and it seems like he's tipped over forever. Doesn't work…

A simple pressure gauge that I use in my propane smoker. The temperature difference between my digital thermometer and this analog meter is less than 4 degrees, I can live with that. I took two stars off the rating because the thermometer I received doesn't have the color chart shown on the Revain, forcing me to go to him and see exactly where the temp is, which kind of contradicts, why i bought it first location. . I wanted to be able to see it through the propane smoker's window pane, but…