Tesla Model 3 2016-2021 Mud Flaps Kit - Mud 🚗 Splash Guard Fender Set (Front and Rear) Easy Installation - 4-PC Set Review

Missing extra seals and front fender mounts. There are only 8 screws in the kit that will not fit the spacers. The original spacers no longer fit due to the increased flap width. The instructions could use more detail - don't worry about that!

I thought it would be an easy install but it took longer than expected. After installation, I see small gaps, but only if you look very closely. This product has a very strong rubber odor that will go away after a few days. Overall happy with this purchase. After 5 months it is still holding up very well.

The front was easy to assemble, the back took a while. The tool that came with the kit should have a smaller and thinner screw head and would be perfect (just a suggestion) to help install the backs. It was difficult to get to him. The quality looks good, the holes are there, the existing screws were used. Good product for the money.

I'm not sure if people write that they don't fit or if there is a gap between them. Anyone who knows where the working end of the hammer is can put them on. I had the wheels removed from the car when I installed them, that definitely makes things easier. Direct installation. Uses factory holes and fits very snugly. Didn't bother with the extra drilled hole and had no problems. Durability seems good, time will tell. Definitely recommend!

Each valve has 2 inserts and a metal clip. The inserts consist of two parts, an expander and a pin. The included extensions are 1/8 inch longer than what you get, so be sure to use them. The front flaps are easy to assemble. The rear ones are more difficult, so the front ones first. For the backs you will need a wrench or 10mm socket to remove the screw from the bottom. Use a screwdriver to remove and pull out the pins from the extensions. There is a plastic nut on the top that you can loosen…