🔧 Enhance Suspension Performance with Traxda 605041 Coil Spring Spacer Review

These spacers are well designed and sturdy. The stock rubber coil spring retainer fit the spacers snugly, but I was concerned that the large hole at the top was too loose when centering the factory mounting tab. I installed them anyway, have driven about 1000 miles and can't hear them rattling or moving. Perhaps the constant pressure of the coil springs is enough to keep them in place. I contacted Traxda for clarification but never received a response.

Installed these on my 2016 4x4 2500 Ram. The instructions are very poor at best. But with very little mechanical skill you should be able to figure it out. Be sure to disconnect the emergency brake cable from the bracket to give it more flexibility. Then remove the lower support bolt from the shocks and unscrew the upper anti-roll bar linkage (this will give you enough clearance for the axle to extend downward). Then remove the coils, place the gasket over the insulators and reinstall. The…

The image featured in this product listing is of an older design that attaches to an axle mount. The second image in this listing also shows the front shim kit. You urgently need to update. If I hadn't done my research on Traxda spacers I would have immediately returned this item thinking I had received the wrong part. I'll increase or decrease my rating when I install it this weekend. The construction feels solid and the performance coating is fairly generous, but my concern is if they will…

Easy to install. You'll need to lower the back panel, which the instructions didn't say, but still took less than an hour to do. Since it's only 1", it only adds a rake to your truck if you have a 2 1/2" front align kit. It's still worth it.

These spacers are well built and sturdy. The stock rubber coil spring retainer fit the spacers snugly, but I was concerned that the large hole at the top was too loose when centering the factory mounting tab. I installed them anyway, have driven about 1000 miles and can't hear them rattling or moving. Perhaps the constant pressure of the coil springs is enough to keep them in place. I contacted Traxda for clarification but never received a response.

Installed on my 2016 Ram 2500 4x4. The instructions are very poor at best. But with very little mechanical skill you should be able to figure it out. Be sure to disconnect the emergency brake cable from the bracket to give it more flexibility. Then remove the lower support bolt from the shocks and unscrew the upper anti-roll bar linkage (this will give you enough clearance for the axle to extend downward). Then remove the coils, place the gasket over the insulators and reinstall. The product…

The image shown in this product listing is of an old design attached to the axle support. The second image in this listing also shows the front shim kit. You urgently need to update. If I hadn't done my research on Traxda spacers I would have immediately returned this item thinking I had received the wrong part. I'll increase or decrease my rating when I install it this weekend. The construction feels solid and the performance coating is fairly generous, but my concern is if they will rattle…