Header banner
Revain logoHome Page
πŸͺ 4 inch window router - yonico 18144 logo

πŸͺ 4 Inch Window Router - Yonico 18144 Review

3

Β·

Very good

Revainrating 4 out of 5Β Β 
RatingΒ 
4.0
πŸͺš Router Bits, πŸ”ͺ Cutting Tools

View on AmazonView on Π―M

Media

(2)
img 1 attached to πŸͺ 4 Inch Window Router - Yonico 18144
img 2 attached to πŸͺ 4 Inch Window Router - Yonico 18144

Description of πŸͺ 4 Inch Window Router - Yonico 18144

This window stool router bit will cut stock up to 3/4" thick and 11/32" deep. The fillet is 3/32". The bit's overall length is 2-11/16" and the shank is 1/2". Create window sills and stools. Premium C3 micro-grain tungsten carbide blades for a sharper & longer lasting edge. For use on table mount and handheld router. Silver induction brazing for maximum strength and durability.

Reviews

Global ratings 3
  • 5
    0
  • 4
    3
  • 3
    0
  • 2
    0
  • 1
    0

Type of review

Revainrating 4 out of 5

When they say 7/8 ", they mean it.

The cutter worked well.The only thing I noticed was that the cutter body was flush with the Bottom of the carbide was I routed a 7/8" piece of wood using a template. And the joint between the part and the template was burning because the cutter body was rubbing against the wood. The rest of the cutter worked very well and if I had been without it it wouldn't have happened. Had the cutter body been a bit shorter this would have been fixed. A great piece for the price.

Pros
  • This window stool cutter allows you to cut work pieces up to 3/4" thick and 11/32" deep. The roundness is 3/32". .The overall length of the bit is 2-11/16" and the shank is 1/2".
Cons
  • Not bad, but...

Revainrating 4 out of 5

Easy to use in cutting machines

I have a built in bay window and needed to replace the windows but was able to keep the frame without having to make a new window sill. This also meant that I had to change chairs. The stool was custom sized so I had to cut it into larger boards and then profile it. This bit was significantly cheaper than others I could find. Well I only needed 12 linear feet. Buying this attachment, a new collet (mine got lost somewhere!) and two 8ft planks was cheaper than buying a 12ft stool that wasn't big…

Pros
  • Fine grit C3 premium tungsten carbide blades for a sharper, more durable edge
Cons
  • Miscellaneous Miscellaneous

Revainrating 4 out of 5

design supervision. 1 inch lumber not 1 inch

Works as intended but the design doesn't take into account that most lumber, scrap wood or whatever is not of its nominal size. this. Board is 1 inch thick, not 1 inch. I have used this to guide the ends of finished rocker panels that come with straight ends. Instead of cutting at an angle and adding a piece to the ends, routing the ends uses less wood and is less of a hassle. I can adjust the depth to fit the concave part of the drawing and most of the bullnose. I then sanded the edge to…

Pros
  • Tinkering window sills and stools
Cons
  • So far so good